20Q5Q5eSQ5TECRP

2020
Q5/Q5 e/SQ5
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Guided Fault Finding must be used, session must be completed and sent to GFF Paperless
 Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test)
 Start Guided Fault Finding with the engine running to insure control modules in transport mode are identified
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Perform any open campaigns*
 Verify Audi phone box customer registration form is present
in vehicle and add the serial number from Elsa (if equipped).
See TSB 2051720
 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*
 Perform any open campaigns*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable spare tire and compressor are present
 Set spare tire pressure*
 Check battery clamps for proper torque*
 Verify operation of luggage cover
 Perform diagnostics work*
Interior
 Install front license plate carrier (if necessary)*
 Verify operation of all seat belts and latches
Exterior
 Check all key buttons and features*
 Check all doors for proper power closing (if equipped)*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
 Prepare the base bars for customer delivery (install bars
only upon customer request)*
Lighting and Windshield
 Test exterior lighting functions
 Test windshield washers. Correct aim if necessary
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Verify SOS button is green and Roadside assistance button
LED will remain off. Reference TSB 2052299 if issues occur
 Verify operation of heated seats
 Verify operation of ventilated seats (if equipped)
 Verify operation of rear heated seats (if equipped)
 Verify operation of manual folding 2nd row
 Verify proper operation of climate control*
Trunk Inspection
 Inspect operation of all power outlets*
 Verify power tailgate is operational and set default opening
height*
 Check panoramic sunroof and sunshade operation (if
equipped)*
Effective 3-24-2020-US
Version 1.4
PRE-DELIVERY INSPECTION (PDI) | 1
2020
Q5/Q5 e/SQ5
Audi Pre-Delivery Inspection
Interior (continued)
On-Hoist Inspection (continued)
 Verify the glove compartment opens and closes properly
 Inspect wheel bolts for proper torque*
 Verify operation of front Passenger Occupant Detection
System
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Settings
Driving Performance
 Verify operation of MMI® touch pad (if equipped)
 Check horn operation
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Verify hold and release of electronic parking brake
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 For the Q5 TFSI e:
Go to the Menu – MMI Settings – Measurement Units –
E-motor consumption – change to mi/kWh
 Verify Speech Dialog System is operating*
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
 Test drive vehicle applying brakes several times*
 Check adaptive air suspension in all positions (if applicable)
 Check steering/tire alignment
 Set dealership location in navigation (if equipped)*
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Turn off Manual Speed Warning (if equipped)*
 Calibrate rear view mirror*
 Set “Music volume while parking” to 6 lines*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Media / Radio / SAT
 Verify operation of all USB ports
Driver Assistance
 Verify operation of AMI or aux. input (if equipped)
 Verify cruise control/ACC with Stop & Go functionality (if
equipped)
 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of all slots
 Program the presets to local stations
 Verify HD Radio is turned “off”*
Audi connect® (USA ONLY) (if equipped)
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Enable satellite map view for navigation (if equipped)*
On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Verify Audi side assist functionality (if equipped)
 Verify Audi side assist functionality Pre sense® rear (if
equipped)
 Verify Audi active lane assist functionality (if equipped)
 Verify operation of parking system (if equipped)*
 Verify operation of Traffic Sign Recognition (if equipped)
 Verify all vehicle Head-up display functionality (if equipped)*
 Verify operation of High-beam assist
 Activate NAV and follow directions back to dealership (if
equipped)
Post-Road Test Inspection
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed
 Check underside of vehicle for fluid leaks and loose components
 Check engine oil level*
 Install wheel locks (if equipped)
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Install wheel bolt covers and center caps as supplied*
Effective 3-24-2020-US
Version 1.4
 Check all fluid levels and top off if necessary
PRE-DELIVERY INSPECTION (PDI) | 2
2020
Q5/Q5 e/SQ5
Audi Pre-Delivery Inspection
Post-Road Test Inspection (continued)
 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains charged
at all times**
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 3-24-2020-US
Version 1.4
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3