T-TT-0604-20

Service Bulletin Details

Public Details for: T-TT-0604-20

Tt: in the interest of customer satisfaction, the adoption of wrap guard film to the front and rear door, window frame moldings (black out moldings), was implemented on 2020 model year highlander and highlander hv. This film should be remov


- 2020 -

Models from 2020
2020 TOYOTA HIGHLANDER
2020 TOYOTA HIGHLANDER HYBRID 
Tech Tip T-TT-0604-20
March 26, 2020
Subject
Market
Pre-Delivery Service - Door Window Frame Molding
Wrap Guard Removal
USA
Service Category
Section
Vehicle Exterior
Exterior Panels/Trim
Applicability
2020 Highlander / HV
APPLICABLE VEHICLES
2020
Highlander
2020
Highlander HV
CONDITION
In the interest of customer satisfaction, the adoption of wrap guard film to the Front and Rear Door,
Window Frame Moldings (Black Out Moldings), was implemented on 2020 model year Highlander and
Highlander HV. This film should be removed after transportation to dealerships, as part of the normal
Pre-Delivery Service (PDS).
RECOMMENDATIONS

Please be sure to use caution when removing the wrap guard during PDS (T-SB-0164-19), as
you would any other locations on the vehicle.
LINK REFERENCES
This Tech Tip does not contain any link references
Expires on
Ver. 2.12 01/01/2020 T
06/26/2020
© 2020, Toyota Motor Sales, USA
Page 1 of 1

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.