20A4TECHREP420
Service Bulletin Details
Public Details for: 20A4TECHREP420
Audi connect section: moved to end of document. Post-road test section: added steps: - verify sos button is green and roadside assistance button led will remain off - it may take up to 20 minutes for the emergency call system to activat
- 2020 -
Models from 2020
2020 AUDI A4 |
2020 AUDI S4 |
2020 A4/S4/A4 allroad Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by a certified Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection Guided Fault Finding must be used, session must be completed and sent to GFF Paperless Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test) Start Guided Fault Finding with the engine running to insure control modules in transport mode are identified For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Trunk Inspection Check Elsa for open campaigns and updates Verify trunk is operational Verify Audi phone box customer registration form is present in vehicle and add the serial number from Elsa (if equipped). See TSB 2051720 Verify operation of emergency release handle Perform any open campaigns* Verify tool kit is installed securely in luggage compartment Perform diagnostic work* Verify inflatable spare tire and compressor are present Perform TSB 2058096/1 “91 Audi connect has no function, SOS LED is off, and SOS warning message in FPK” Set spare tire pressure* Perform MMI Menu Reset: 5F-Information Electronics >> Guided Functions >> Basic Settings >> Reset MMI Menu Settings Deactivate privacy mode: Main Menu >> Privacy >> Activate Privacy Settings (Turn off) Turn Vehicle Off and allow Bus Sleep Cycle Install front license plate carrier (if necessary)* Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Check battery clamps for proper torque* Interior Verify operation of all seat belts and latches Check operation of window, lock, and seat controls* Inspect mirrors for proper operation* Check rear view mirror operation* Verify operation of all interior lights Exterior Verify operation of heated seats Check all key buttons and features* Verify operation of heated rear seats (if equipped) Inspect exterior for damage, dings, dents and surface scratches. Report and repair any damage before delivery to the customer Verify operation of ventilated seats (if equipped) Verify proper operation of climate control* Inspect operation of all power outlets* Lighting and Windshield Check panoramic sunroof and sunshade operation* Test exterior lighting functions Verify the glove compartment opens and closes properly Test windshield washers. Correct aim if necessary Verify operation of front Passenger Occupant Detection System Effective 4-20-2020-US Version 1.5 PRE-DELIVERY INSPECTION (PDI) | 1 2020 A4/S4/A4 allroad Audi Pre-Delivery Inspection Settings Driver Assistance Set Time source setting to “GPS” and set Auto daylight savings time to “on”* Verify cruise control/ACC functionality (if equipped) Verify operation of MMI® touch Set Time to “Automatic setting” and “Automatic time zone” Verify and set language and measurement units* Verify Speech Dialog System is operating* Verify Audi side assist functionality (if equipped) Verify operation of parking system (if equipped)* Verify all vehicle Head-up display functionality (if equipped)* Activate NAV and follow directions back to dealership (if equipped) Set “Entertain. Fad.” in Parking aid to an audible level* Set “Music volume while parking” to medium* Post-Road Test Inspection Set dealership location in navigation (if equipped)* Verify SOS button is green and Roadside assistance button LED will remain off Turn off Manual Speed Warning (if equipped)* Media / Radio / SAT Verify operation of aux. input Insert SD card and test function of all slots Verify HD Radio is turned “off”* On-Hoist Inspection Remove transport suspension blocks (follow ELSA instruction) Check steering, boots, brake system, hoses, tires and wheels for damage Check underside of vehicle for fluid leaks and loose components Inspect wheel bolts for proper torque* Install wheel locks (if equipped) It may take up to 20 minutes for the emergency call system to activate (LED turns green) after flight/transport mode deactivation The vehicle must not be delivered to the customer if the emergency call function has not been successfully activated (LED lights up in green) Interrogate fault memory and upload Diagnostic Log to GFF Paperless Server Check service interval and verify correct interval is displayed Check engine oil level* Check all fluid levels and top off if necessary Ensure the yellow tire pressure tag is installed on the steering wheel Apply 30 Day Inventory Maintenance Sticker** Install wheel bolt covers and center caps as supplied* Install showroom charger to ensure battery remains charged at all times** Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Audi connect® (USA ONLY) (if equipped) Driving Performance Turn on the Wi-Fi® hotspot (if equipped)* Check horn operation Check Wi-Fi® hotspot visibility. No data available at PDI (if equipped)* Verify hold and release of electronic parking brake Enable satellite map view for navigation (if equipped)* Verify engine Start-Stop System functionality* Verify engine performance and acceleration* Verify transmission operation, including shift paddles Test drive vehicle applying brakes several times* Check steering/tire alignment Check for squeaks, rattles and wind noise. Repair any squeaks, rattles or wind noises before delivery to the customer Calibrate rear view mirror* Verify quality of radio reception in AM/FM/SiriusXM® bands Effective 4-20-2020-US Version 1.5 PRE-DELIVERY INSPECTION (PDI) | 2 2020 A4/S4/A4 allroad Audi Pre-Delivery Inspection Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 4-20-2020-US Version 1.5 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 3