SF V4 Tool Memo

Tooling Update for Streetfighter V4
2020 Streetfighter V4 (all versions)
Service Memo
Date:
To:
From:
May 29, 2020
Dealer Principal, General Manager, Service Manager, North American Dealer
Network
Richard Kenton, Technical Director
Dear Dealers,
Due to the adoption of a new clutch cover, a new tool Part no. 889450110 is required for
tightening the clutch nut; this tool is mandatory and was auto shipped by DMH.
For dealers not participating in auto-ship, you must order this tool individually to maintain
your required tooling compliance.
PART NO.
DESCRIPTION
889450110
Tightening tool for
clutch hub nut
IMAGE
APPLICATION
(Streetfighter V4)
To use the tool (1) Part no. 889450110 for tightening the clutch nut on the Desmosedici
Stradale engine of the Streetfighter V4 it is necessary to install hub (2). This part is present on
tool part no. 887133879 from the 1199 tool kit (an existing required tool in your shop) and is
fastened by means of 3 screws (3); therefore, depending on the tool to be used, you should
install the suitable hub (2).
1/2
Tooling Update for Streetfighter V4
2020 Streetfighter V4 (all versions)
Service Memo
NOTE
The hub and its screws are interchangeable for the following tools:
Part no.887138852: Clutch hub nut tightening tool (Panigale V4)
Part no.887133879: Clutch hub nut tightening tool (1199 Panigale)
Part no.889450110: Clutch hub nut tightening tool (Streetfighter V4)
The list of Ducati Service specific Tools (Ed.02-2020) has been updated and is available in
attachment with this Memo. This document will cancel and replace Ed.11-2019, currently
available in the Download Area of the Workshop Manual on DCS.
For questions about this Service Bulletin,
please contact your Service Area Manager.
2/2