K01474232

Service Bulletin Details

Public Details for: K01474232

Diagnostic trouble code (dtc) P2042-01: diagnostic instructions us17+obd16 emissions and newer


- 9999 -

5/28/2020
Print Case
Solution K01474232
Thursday, May 28, 2020 1:50:36 PM CEST
** SOLUTION **
Title
Diagnostic Trouble Code (DTC) P2042-01: Diagnostic Instructions US17+OBD16 Emissions And Newer
Mack Models
Mack Model
LR , MRU - TerraPro , TE - TerraPro , AN - Anthem , CHU - Pinnacle, Axle
back , CXU - Pinnacle, Axle front , GR - Granite , GU - Granite , PI Pinnacle
Volvo Models
Volvo Model
VN , VNL , VNR , VNX , VAH , VHD
Emission Standard
Emission Standard
US17+OBD16 , US17+OBD18 , US17+OBD19
Engine family
Engine family
11L Engine , 13L Engine , MP7 , MP8
** SOLUTION **
Cause
To be read prior to replacing any parts. Additional diagnostic instructions
for addressing DTC P2042-01 on US17 emissions level vehicles.
Solution
P2042-01 is an evaluation of the DEF Pump temperature sensor. When
battery voltage is low and both ambient air temperature and DEF tank
temperature are below 32 °F (0 °C), this diagnostic logs a fault, even when
there is no problem with the DEF pump temperature sensor.
If a vehicle has this code logged on a DTC Readout:
- Review the Detailed Status Information for the relevant code on the DTC
Readout.
https://secure4.volvo.com/cbr/printCase.action?caseId=368560
1/3
5/28/2020
Print Case
• If Confirmed DTC is TRUE:
- Proceed with diagnostics for the code in Premium Tech Tool.
- If diagnostic steps in PTT do not determine an external issue (wiring,
power, etc.) and advises to replace the pump: DO NOT REPLACE THE
PUMP.
- Clear the code and release the vehicle.
• If Confirmed DTC is FALSE:
- DO NOT troubleshoot the code.
- If no other codes are present that require diagnosis, clear the DTC and
release the vehicle.
This issue is expected to be addressed in a future software update, and this
solution will be updated when more information is available.
Internal comments
If P2042-01 is confirmed (we have seen very small percentage of trucks
(BO)
logging the code had MIL, <5%), we would like to get P1H6V parameter
logged with our regular panel for 2-3 minutes.
Key ON 15 seconds, start idle for 30 seconds, Key Off 15 seconds
Repeat 2 to 3 times.
Expected to see P1H6V (DEF pump temperature) to read something other
than 419F (default) atleast for few seconds.
Contact NATARAJ BHAT if there is any doubt. DO NOT RECOMMEND DEF
PUMP CHANGE.
Function(s)/component(s) affected
Function affected
DEF Dosing
Customer effect
Main customer effect
fault code/display
Administration
Author
UT0031H
Dealer ID
UT0031H
Last modified by
A241298
Creation date
23-03-2020 14:03
https://secure4.volvo.com/cbr/printCase.action?caseId=368560
2/3
5/28/2020
Print Case
Date of last update
13-05-2020 22:05
Review date
31-05-2020 00:05
Status
Published
NA_Reviewer
ut0031h
NA_Author_Group
GTT
UNCONTROLLED COPY. Printed document is for temporary use only and should not be retained.
https://secure4.volvo.com/cbr/printCase.action?caseId=368560
3/3


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.