LI28.19-N-071366
Service Bulletin Details
Public Details for: LI28.19-N-071366
At times, all-wheel drive and/or gear reduction cannot be switched on or off. Engagement is sporadic or erroneous. Unfavorable position of transfer case absolute sensor (turning angle sensor) (b57). Update software of transfer case contro
- 2020 -
Models from 2020
2020 MERCEDES-BENZ SPRINTER 1500 |
2020 MERCEDES-BENZ SPRINTER 2500 |
2020 MERCEDES-BENZ SPRINTER 3500 |
2020 MERCEDES-BENZ SPRINTER 4500 |
Switchability of transfer case Topic number LI28.19-N-071366 Version 1 Function group 28.19 Transfer case - electrical system Date 06-19-2020 Validity Model 907 with code ZG3 (4x4 - High Range Transfer case with Low Range) Reason for change Content updated Reason for block Complaint: At times, all-wheel drive and/or gear reduction cannot be switched on or off. Engagement is sporadic or erroneous The following fault codes may be present in the transfer case control unit (N45): P127364 The signal from the sensor rotor has a malfunction. There is an implausible signal. P127419 The control lines for the actuator of the all-wheel drive have a malfunction. The limit value for current is exceeded. P127414 The control lines for the actuator of the all-wheel drive have a malfunction. There is a short circuit to ground or an open circuit. P127911 The "all-wheel drive" indicator lamp has a malfunction. There is a short circuit to ground. Cause: Unfavorable position of transfer case absolute sensor (turning angle sensor) (B57). Remedy: Update software of transfer case control unit (N45). If the problem occurs repeatedly or the software A907 902 90 03 is already present in the transfer case control unit (N45), please create a TIPS case. NOTE: Do not replace any parts! Symptoms Power transmission / Transfer case / Function / No power flow Power transmission / Transfer case / Function / Does not shift (low range) Power transmission / Transfer case / Function / Electrical fault/Fault code 06-19-2020 5:14 PM © Copyright Mercedes-Benz AG BSTRINE Page 1/2 Power transmission / Transfer case / Function / Off-road gear cannot be engaged Control unit/fault code Control unit Fault code Fault text N45 - All-wheel drive (VG) (VG907) P127419 The control lines for the actuator of the all-wheel drive have a malfunction. The limit value for current has been exceeded. N45 - All-wheel drive (VG) (VG907) P127364 The signal of the sensor rotor has a malfunction. There is an implausible signal. N45 - All-wheel drive (VG) (VG907) P127414 The control lines for the actuator of the all-wheel drive have a malfunction. There is a short circuit to ground or an open circuit. N45 - All-wheel drive (VG) (VG907) P127911 The indicator lamp 'All-wheel drive' has a malfunction. There is a short circuit to ground. Operation numbers/damage codes Op. no. Operation text Time 54-0650 ON-BOARD POWER SUPPLY VOLTA- 0.1 GE MAINTAIN (WHEN CHECKING/TESTING AND TROUBLESHOOTING) 54-1011 PERFORM QUICKTEST 54-0990 PROGRAM, CODE TRANSFER CASE 0.3 CONTROL UNIT (AFTER QUICKTEST) Damage code Note 0.2 53142 90 Validity Vehicle Engine Transmission Sprinter 907 * * 06-19-2020 5:14 PM © Copyright Mercedes-Benz AG BSTRINE Page 2/2