T-SB-0027-20 Rev

T-SB-0027-20
Rev1
March 23, 2020
Paint Protection Film Decal Removal
Service
Category
Vehicle Exterior
Section
Exterior Panels/Trim
Market USA
Applicability
YEAR(S)
MODEL(S)
2021
4Runner, Avalon, Avalon
HV, C-HR, Camry, Camry
HV, Corolla, Corolla
Hatchback, Corolla HV,
Highlander, Highlander HV,
Land Cruiser, Mirai, Prius,
Prius Prime, RAV4, RAV4
HV, RAV4 Prime, Sequoia,
Supra, Tacoma, Tundra,
Venza HV
ADDITIONAL INFORMATION
REVISION NOTICE
July 31, 2020 Rev1:
 Applicability has been updated to include 2021 model year RAV4 Prime and
Venza Hybrid vehicles.
Any previous printed versions of this bulletin should be discarded.
Introduction
TMNA Accessory Sales and Marketing has developed a Toyota paint protection film (PPF) decal
(treated with a specially developed light adhesive) for 2021 model year Toyota vehicles. The
decal comes in two sizes (2.8 in. x 8 in. and 4 in. x 8 in.) for small and large hoods and will be
applied to the top of PPF for all series at TLS accessory installation facilities. The decal is
intended to stay affixed to the film until delivery detail/wash.
Just before customer delivery, follow the Removal Procedure in this bulletin to remove the decal
and any residue left by the adhesive.
Figure 1.
© 2020 Toyota Motor Sales, USA
Page 1 of 3
T-SB-0027-20
Rev1
March 23, 2020
Page 2 of 3
Paint Protection Film Decal Removal
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Required Tools & Equipment
REQUIRED TOOLS & MATERIAL
70% Isopropyl Alcohol, Goo
Gone®,
QTY
or Equivalent
Spray Wax (Meguiar’s® Ultimate Quik Detailer™ or Equivalent)
Removal Procedure
Decal Removal
1. With a fingernail, pick up one of the corners
of the hood decal.
Figure 2.
NOTICE
Do NOT push down on the decal while
picking up the corner.
2. Lift the loose corner of the decal until
there is enough loose material to grab.
Figure 3.
3. Slowly pull the decal up and away from
the sticking surface, being careful not to
force it.
© 2020 Toyota Motor Sales, USA
As Needed
As Needed
T-SB-0027-20
Rev1
March 23, 2020
Paint Protection Film Decal Removal
Removal Procedure (continued)
Residue Cleaning
1. Apply a small amount of 70% isopropyl
alcohol, Goo Gone®, or equivalent to a
clean cloth and wipe down the adhesive
area using a circular motion.
Figure 4.
NOTE
 If using a spray cleaner, apply a light mist
and allow the liquid to settle.
 Make sure to clean the surrounding area.
2. Once ALL adhesive is removed from the
vehicle panel, perform a final inspection.
Figure 5.
If necessary, perform a final wipedown
with spray wax.
NOTE
Make sure to clean the surrounding area.
© 2020 Toyota Motor Sales, USA
Page 3 of 3