S7520

Service Bulletin Details

Public Details for: S7520

King pin inspection


- 2021 -

Models from 2021
2021 VOLVO VHD
2021 VOLVO VNL 
CAMPAIGN FOR:
King Pin Inspection
DESCRIPTION:
Need to verify king pin nut torque.
CORRECTIVE ACTION:
1. Pull king pin caps
2. Visually inspect (nuts in place, greased, worn, etc…)
3. If nuts are missing, replace. (Follow IMPACT procedure)
4. King Pin nut torque check, using torque wrench, tighten the nut until you see movement (note the torque)
5. Re-torque the nuts to specification (763-934 Nm - 563-689 lb-ft).
6. Report results of inspection to James Olsen - [email protected]
Note:
If any questions contact [email protected]
UCHP SCC CODE: S7520
EXPIRATION DATE: 12/31/2021
UCHP LABOR CODE: 6000-06-09-01 Steering, Inspection
CAUSAL PART: 1075914
PARTS MARKUP: na
PARTS: na
.3hr

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.