A9020732059891_3
Service Bulletin Details
Public Details for: A9020732059891_3
This informational bulletin directs you to read the ssp and not perform any repairs for the concern.
- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 -
Models from 2022
Models from 2021
Models from 2020
Models from 2019
Models from 2018
2018 AUDI A4 |
2018 AUDI A5 |
2018 AUDI A5 CABRIOLET |
2018 AUDI Q5 |
2018 AUDI Q7 |
2018 AUDI RS5 |
2018 AUDI S4 |
2018 AUDI S5 |
2018 AUDI S5 CABRIOLET |
2018 AUDI SQ5 |
Models from 2017
2017 AUDI A4 |
2017 AUDI Q7 |
2017 AUDI S4 |
90 Audi pre sense - restricted function icon is displayed after engine starts 90 20 73 2059891/3 October 7, 2020. Supersedes Technical Service Bulletin Group 90 number 20-68 dated September 15, 2020 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4, A4 allroad, S4, Q7, and SQ7 2017 - 2022 All Not Applicable A5, A5 Cabriolet, A5 Sportback, S5, S5 Cabriolet, S5 Sportback, RS5, RS5 Cabriolet, Q5, and SQ5 2018 - 2022 All Not Applicable A6, S6, A7, S7, A8, RS6, and S8 2019 - 2022 All Not Applicable A6 allroad, A6 Avant, Q3, Q8, SQ8, RS6 Avant, RS7, RSQ8, Audi e-tron quattro, and Audi e-tron Sportback 2020 - 2022 All Not Applicable Condition REVISION HISTORY Revision Date Purpose 3 - Revised header (Updated models) 2 09/15/2020 Revised header (Added new models) Revised Condition (Changed initialization time, velocity requirement and added MY2021 icon) Page 1 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Revised Technical Background (Updated description to reflect the new models) 1 06/29/2020 Initial publication Customer states: One of the symbols for “Audi pre sense not available at the moment” is shown for about 20 seconds after engine starts and then it disappears (Figures 1 - 2). In some models, the vehicle must be moved before the initialization indicator goes out. Figure 1. Symbol for “Audi pre sense not available at the moment”. Figure 2. Symbol for “Audi pre sense not available at the moment” (MY2021 and on). Technical Background This icon is shown for about 20 seconds after switching on the ignition, because Audi pre sense is not available at the time. The front camera for driver assist systems R242 needs about 20 seconds, or, in some models, a velocity signal, to start up. More information is included in Self-Study Program 970363– 2017 Audi Q7 Occupant Protection and Infotainment System More Info | Launch. This SSP is a prerequisite to the 2017 Q7 ILT and e-launch package. Production Solution Not applicable. Page 2 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Service No repair is available at this time. 1. Do not perform any repairs. Any repairs for this concern may be denied. 2. Inform the customer that it takes the front camera for driver assist system (R242) about 20 seconds to start up and the icon informs the driver of this fact. This is normal behavior. Warranty This TSB is informational only and not applicable to any Audi Warranty. Additional Information More information on this system can be found in the following resources: SSP: 970363– 2017 Audi Q7 Occupant Protection and Infotainment System More Info | Launch. All part and service references provided in this TSB (2059891) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2020 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 3 of 3 © 2020 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.