A4020162061003_2

Service Bulletin Details

Public Details for: A4020162061003_2

This bulletin contains instructions for dealing with dtc B200000.


- 2021 - 2020 -

40 DTC B200000 stored in the front and/or rear stability control module
40 20 16 2061003/2 October 19, 2020. Supersedes Technical Service Bulletin Group 40 number 20-15 dated
October 8, 2020 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A8, S8
2020 - 2021
All
Stability control modules
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised Service (Updated instructions)
1
10/06/2020
Initial publication
Customer states:
 Multiple active suspension malfunction messages appear in the instrument cluster.
Workshop findings:
The following DTC is logged in the front stability control module and/or the rear stability control module, J1152
and J1153 (address word 00D4 and/or 00D5):
 DTC B200000 (Control unit fault).
Technical Background
Not applicable.
Production Solution
Not applicable.
Service
If DTC B200000 is logged in the front stability control module and/or the rear stability control module, J1152 and
J1153 (address word 00D4 and/or 00D5):
 Record all battery history data from the data bus on board diagnostic interface, J533 (address word 0019).
Page 1 of 2
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
 Follow the ODIS test plan instructions for correction of the stored fault.
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
4024
Damage Code:
0040
Diagnostic Time:
GFF
0150 0000
Time stated on
the diagnostic
protocol
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
0121 0004
10 TU
Claim Comment:
As per TSB #2061003/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2061003) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2020 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
Page 2 of 2
© 2020 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.