SET-TSB-16-003
Service Bulletin Details
Public Details for: SET-TSB-16-003
On vehicles equipped with the set accessory split rear dual exhaust system, the
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2016
2016 TOYOTA TUNDRA |
Models from 2015
2015 TOYOTA TUNDRA |
Models from 2014
2014 TOYOTA TUNDRA |
Models from 2013
2013 TOYOTA TUNDRA |
Models from 2012
2012 TOYOTA TUNDRA |
Models from 2011
2011 TOYOTA TUNDRA |
Models from 2010
2010 TOYOTA TUNDRA |
Models from 2009
2009 TOYOTA TUNDRA |
Models from 2008
2008 TOYOTA TUNDRA |
Models from 2007
2007 TOYOTA TUNDRA |
ATTENTION: This Technical Service Bulletin was issued by Southeast Toyota Distributors, LLC. For Toyota Dealers located within the Southeast Region: Please refer to SET Dealer Daily to obtain instructions on how to order parts and submit a warranty claim (If applicable). For Lexus Dealers or Toyota Dealers NOT located in Florida, Georgia, Alabama, South Carolina or North Carolina: For Repair Authorization, Parts Ordering, and Warranty Claims please contact Southeast Toyota Distributors Warranty Claims Department: (888)851-2722 Press 5, then Press 4 for Out of Region SET Repairs [email protected] Thank you for your continued support. 4/22/2016 SET - TSB-16-003 Category: Engine/Hybrid System Section: Intake/Exhaust Tundra Split Rear Dual Exhaust Revised Exhaust Hangers Applicability YEAR(S) MODEL(S) 2007-16 Tundra INSTALLED ACCESSORY INFORMATION DESCRIPTION ACCESSORY CODE KIT PART NUMBER Split Rear Dual Exhaust DE1 00016-34731, 00016-34734-03 **This Publication does not apply to Vehicles Originally Equipped with OE exhaust from the factory, TRD exhaust System, or Systems added by other manufacturers. Introduction On vehicles equipped with the SET accessory Split Rear Dual Exhaust system, the exhaust pipe may become loose due to the rubber isolator separating from the bracket. This will allow the exhaust pipe to come in contact with the frame or suspension and cause a rattling noise. The exhaust pipe is still supported by the remaining brackets. An updated rear exhaust hanger bracket is available to maintain correct alignment of the hanger and Rubber Isolator. Warranty Information For Dealers located in the Southeast Region, Florida, Georgia, Alabama, South Carolina, or North Carolina, Submit Warranty claim utilizing the information below. OP CODE COMBO DESCRIPTION TIME OFP T1 T2 CODE ADE011 A Replace both rear exhaust hanger 0.4 00016-34731-06 99 99 Port Installed Option (PIO) ‐ is in effect for 36 months or 36,000 miles from the vehicle’s in‐service date, whichever occurs first. Unless otherwise specified in vehicle VIN inquiry. Dealer Installed Option (DIO) ‐ is in effect for 12 months, regardless of mileage, from the date the part(s) was installed on the vehicle or the remainder of any applicable New Vehicle Limited Warranty, whichever provides greater coverage. Over the Counter Sale (OCS) ‐ is in effect for 12 months, regardless of mileage, from the date the part(s) were sold. Labor is not warranted for over‐the counter service part replacements. If you are a dealer located outside of the Southeast Region, please contact the SET Accessory Warranty Department at (888) 851-2722 or email [email protected] for claim payment instructions. Parts Information PART NUMBER 00016-34739-01 DISCRIPTION Left and Right Exhaust Hangers If you are a dealer outside of the SET region, please contact the SET accessory department at (888) 851-2722 or email [email protected]. 1 April 22, 2016 2 Revised Exhaust Hanger Brackets 1. Perform a TIS VIN inquiry to verify Vehicle is equipped with SET Accessory split rear dual exhaust installed. Port Installed Accessories are identified with “DE 10: Performance Dual Exhaust” in the Vehicle Info Tab Dealer installed Accessories are identified with the kit part number found in Service History. This TSB does not apply if vehicle does not have SET accessory. 2. Inspect Rear Exhaust Hangers to confirm condition Condition: Rubber insulator has come off the exhaust hanger. TSB may not apply if concern is not as shown. Image of Condition 3. Reference kit installation instruction to replace rear exhaust hanger with revised part number 00016-34739-01. 4. To complete repair center the rubber isolator in the area shown on bracket. Southeast Toyota Distributors, LLC