Toyota Tundra 2007

• Recall 190475 [USA]: An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
  Toyota motor engineering & manufacturing (toyota) is recalling certain jtekt power steering gear assembly service parts for 2007-2021 tundra and 2008-2022 sequoia, part numbers 44250-0c160, 44250-0c131, 44250-0c170, and 11250-0c121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
  dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on february 17, 2022. Owners may contact toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21th01.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  Show Content

• Recall 110301 [USA]: If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
  Southeast toyota distributors, llc (set) is recalling certain 2005-2011 4runner, highlander, sequoia, and sienna, 2005-2010 avalon and tundra, 2006-2008 camry solara, 2006-2010 highlander hybrid, 2006-2011 rav4 and tacoma, 2007-2010 fj cruiser, 2007-2011 camry hybrid, 2009-2010 venza, 2010-2012 prius, 1988-1990 and 2005-2010 camry, and 1989 and 2009-2010 corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
  set will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on july 14, 2016. Owners may contact set customer service at 1-866-405-4226. Set number for this recall is set16b.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 107238 [USA]: Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
  Southeast toyota distributors, llc (set) is recalling certain model year 2010-2011 prius and corolla, 2009-2011 venza, 2006-2010 avalon, 2007-2010 fj cruiser, 2005-2011 sienna and sequoia, 2006-2011 tacoma 4x2 and 4x4, camry, highlander, tundra 4x2 and 4x4, and 2007-2011 rav4 and 4runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
  set will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in january 2015. Owners may contact set customer service at 1-866-405-4226.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 93387 [USA]: If the switch overheats, it may melt, possibly resulting in a fire.
  Toyota is recalling certain model year 2007-2009 camry, camry hybrid, rav4, corolla, corolla matrix, tundra, sequoia, highlander, highlander hybrid, yaris, scion xb, scion xd and pontiac vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
  toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their toyota dealer or the toyota customer experience center at 1-800-331-4331. General motors will contact the pontiac vibe owners affected by this recall and gm dealers will inspect and repair switches as necessary. Those owners may contact pontiac customer care at 1-800-762-2737.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 76479 [USA]: Drivers will not receive a warning from the tire pressure monitor that one or more tires are underinflated, increasing the risk that the vehicle will be driven with one or more underinflated tires, increasing the risk of a tire failure that may lead to a crash.
  Southeast toyota is recalling certain model year 2007-2011 tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring systems." the tpms on some vehicles may not have been properly calibrated and as a result the low tire pressure warning lamp may not illuminate should the inflation pressure in one or more of the vehicle's tires fall below the threshold for when the low tire pressure warning lamp should illuminate.
  dealers will recalibrate the tire pressure monitoring system in accordance with the regulation free of charge. The safety recall began during july 2011. Owners may contact southeast toyota customer assistance center toll free at 1-800-301-6859, monday through friday, 8:30 am to 5:00 pm, eastern standard time.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 82787 [USA]: This does not meet the standard requirements.
  Gulf states toyota is recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
  dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. The safety recall began on may 27, 2010. Owners may contact gulf states toyota at 713-580-3300.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 73553 [USA]: A driver may overload a vehicle which may increase the risk of a crash.
  Southeast toyota is recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
  dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. The safety recall began on may 27, 2010. Owners may contact southeast toyota at 1-800-301-6859.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 73377 [USA]: The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
  Toyota is recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, rav4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. Due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the pedal sensor assembly, the sliding surface of the lever may become smooth during vehicle operation. In this condition, if condensation occurs on the surface, as may occur from heater operation (without a/c) when the pedal assembly is cold, the friction when the accelerator pedal is operated may increase, which may result in the accelerator pedal becoming harder to depress, slower to return, or, in the worst case, mechanically stuck in a partially depressed position.
  dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. Gm will notify owners for the pontiac vibe please see 10v-018. This service will be performed free of charge. The safety recall is expected to begin on february 5, 2010 and will be completed on march 15, 2010. Owners may contact toyota at 1-800-331-4331.
  toyota safety recall no. Aoa. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 68069 [USA]: A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
  Toyota is recalling certain model year 2004-2010 passenger vehicles. The accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
  toyota filed an amended defect report on november 25, 2009, stating that dealers will modify the accelerator pedal and, on certain vehicles, alter the shape of the floor surface under the pedal. These changes address the risk of pedal entrapment due to interference with the floor mat. Redesigned accelerator pedals will become available beginning in april 2010 and dealers will replace any modified pedal with the new pedal if desired. Also, dealers will replace any genuine toyota or lexus all-weather floor mats with redesigned all-weather mats, or repurchase the previous mats from owners who do not want the new ones. Additionally, software modifications will be installed on camry, avalon and lexus es 350, is 350 and is 250 models that will ensure that the brake overrides the accelerator in the event both brake and accelerator pedals are applied. Toyota will begin mailing letters to owners on december 31, 2009. Owners may contact toyota at 1-800-331-4331, lexus at 1-800-255-3987.
  toyota recall no. 90l/90lg.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 82390 [USA]: Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
  Toyota is recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. These vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
  toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. The safety recall began on august 18, 2009. Owners may contact toyota at 1-888-270-9371.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 78436 [USA]: Cracked or broken wheel nuts could result in a vehicle crash.
  Southeast toyota is recalling alloy wheel lug nuts used for the 18" diamond finish 5-spoke alloy wheels and 20" painted alloy wheels with 6-dual spokes sold as an upgrade package for 2007 toyota tundra model vehicles. The wheel nuts can crack and break if the wheels are not installed carefully or not carefully tightened. This wheel nut condition could occur at the time of wheel installation, tire rotation, or service.
  southeast toyota will notify owners and replace the wheel nuts with a more robust wheel nut free of charge. The recall began on april 21, 2008. Owners may contact southeast toyota customer loyalty department toll-free at 800-301-6859.
  customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 81977 [USA]: If a vehicle's wheel has a cracked or broken wheel nut condition and the wheel becomes loose and falls off the vehicle without warning, a crash could occur.
  Southeast toyota is recalling 1,555 my 2007 tundra vehicles due to a wheel nut issue. The recalled vehicles are my 2007 tundras equipped with 18" installed diamond finish 5-spoke alloy wheels (option code wn1 or wn4) or 20" installed painted alloy wheels with 6 dual spokes (option code wv1 or wv4). Affected vehicles were originally sold in florida, georgia, alabama, north carolina or south carolina. When the vehicle was processed at the port, the upgraded alloy wheels were fastened with new wheel nuts. The wheel nuts can crack and break if they are not installed carefully or not carefully tightened. This wheel nut condition could occur at the time of wheel installation, tire rotation, or service.
  dealers will replace the attaching wheel nuts. The recall began on april 18, 2008. Owners may contact southeast toyota at 1-800-301-6859.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 75843 [USA]: In this condition, there is a possibility that the yoke may break causing the propeller shaft to separate at the joint and come into contact with the road surface or the fuel tank which could result in a loss of vehicle control or a fuel leak.
  On certain 4-wheel drive pickup trucks, due to the improper heat treatment of the slip yokes that had been reworked during the manufacturing process, the hardness of the slip yoke may be insufficient.
  dealers will inspect the slip yoke and replace the propeller shaft if necessary free of charge. The recall began on january 7, 2008. Owners may contact toyota at 1-800-331-4331.
  toyota recall no. 70g.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2021723 [Canada]: Accessories
  Issue: this recall is for certain block heater kits installed on certain vehicles or sold as accessories at toyota or lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: this recall only affects the following block heater/cord part numbers: C014003034 pk5a408j09 pU14000904 C014003151 pk5a408j13 pU14000905 C014000885 pk5a489j11 pU14000907 C014000888 pk5a489j22 pU14000909 C014000907 pk5a410h00 pU14000911 C014100904 pU14000900 pU14000913 C014100907 pU14000901 pU14003571 C014100911 pU14000902 pk5a408j05 pU14000903 safety risk: engine block heater wiring that overheats or melts could create the risk of a fire. Corrective actions: toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

  Show Content

• Recall 2021718 [Canada]: Steering
  Issue: on certain vehicles, a defect in the steering gear assembly could cause it to leak power steering fluid. If this happens, there could be a loss of power steering assist. Note: for 2007-2020 models, this recall only affects 41 vehicles that had a replacement steering gear installed in 2021. Safety risk: a loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. Corrective actions: toyota will notify owners by mail and instruct you to take your vehicle to a dealer to inspect, and if necessary, replace power steering gear assembly.

  Show Content

• Recall 2013353 [Canada]: Accessories
  On certain vehicles equipped with an optional tonneau cover where the front-most panel can be opened with the vehicle ignition key, the lock cylinder could bind. If the lock cylinder were to bind in the open position, the panel may not remain closed and the tonneau cover assembly could separate from the vehicle while it is being driven. This could potentially result in property damage and pose a hazard to other road users. Correction: dealers will affect repairs when service parts become available. In the interim, the panel release mechanism will be disabled or the tonneau cover removed, at the owner's choice.

  Show Content

• Recall 2012338 [Canada]: Electrical
  On certain vehicles, due to improperly applied grease, the driver's side power window master switch could stick or become inoperative. If attempts are made to lubricate the switch, the switch assembly could overheat and melt. A melting switch may produce smoke and potentially lead to a fire causing property damage and/or personal injury. Correction: dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary.

  Show Content

• Recall 2010012 [Canada]: Other
  On certain vehicles, accelerator pedal movement may become rough, slow to return, or the pedal may stick in a depressed position. This could result in a loss of throttle control and a vehicle crash, causing property damage, personal injury or death. Correction: dealers will install a steel reinforcement bar to the accelerator pedal assembly. With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.

  Show Content

• Recall 2010124 [Canada]: Accessories
  On certain vehicles, if the toyota optional accessory "tray-type" floor mat is not secured by the retaining hooks, or if it is placed on top of an existing floor mat, the "tray-type" floor mat could move forward and interfere with the accelerator pedal. This could result in a crash causing property damage, personal injury or death. Correction: the manufacturer will notify owners to remove the "tray-type" floor mat and provide instructions on how to obtain a reimbursement.

  Show Content

• Recall 2009290 [Canada]: Other
  On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.

  Show Content

• Recall 2007412 [Canada]: Powertrain
  On certain four wheel drive vehicles, the rear driveshaft slip yoke may have received improper heat treatment during the manufacturing process. Insufficient hardness may allow the slip yoke to break, causing the propeller shaft to separate at the joint and come into contact with the road surface or the fuel tank. A fuel leak, in the presence of an ignition source, could result in a vehicle fire. Loss of the rear driveshaft would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash, causing personal injury or death. Correction: dealers will inspect and, if required, replace the propeller shaft.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Under mounted spare tire rusted out and fell off driving down the highway, almost caused an accident

Under mounted spare tire rusted out and fell off driving down the highway, almost caused an accident

My truck first thing in morning will not shift into 3rd gear until i stop put in park and then drive and once going down road it shifts and drives fine when reported it to dealer he tells me that it has to warm up that his does same thing , all my lights on gauges comes on flashing oil light 4 wheel drive light the skid light every light comes on i take cables off battery and wait a while hook up and they all go off what would cause this it does it almost daily why it's in motion on city and highway roads

My truck first thing in morning will not shift into 3rd gear until i stop put in park and then drive and once going down road it shifts and drives fine when reported it to dealer he tells me that it has to warm up that his does same thing , all my lights on gauges comes on flashing oil light 4 wheel drive light the skid light every light comes on i take cables off battery and wait a while hook up and they all go off what would cause this it does it almost daily why it's in motion on city and highway roads

2007 toyota tundra. While driving approximately 40 mph, the check engine, esc, and vsc warning indicators illuminated as i was entering the freeway then the vehicle started to lose power and would not accelerate more than 60mph, the truck went into a limp mode. I reset the ecm by disconnecting the battery but it came back. The approximate failure mileage was 71k. This issue is all over the internet and should be covered by emissions warranty. Called the dealer and it is not covered by federal emissions warranty after 10yrs. Not good!

2007 toyota tundra. While driving approximately 40 mph, the check engine, esc, and vsc warning indicators illuminated as i was entering the freeway then the vehicle started to lose power and would not accelerate more than 60mph, the truck went into a limp mode. I reset the ecm by disconnecting the battery but it came back. The approximate failure mileage was 71k. This issue is all over the internet and should be covered by emissions warranty. Called the dealer and it is not covered by federal emissions warranty after 10yrs. Not good!

I have very bad rust in the bed of my 07 dc. I bought the truck new. The rust was obscured by the toyota bed liner until i saw other owners posting and checked it out. I keep my truck in immaculate condition and it only has 57,000 miles. The rust is coming from underneath and is focused around the bolts that hold the bed to the frame. I am afraid that the bed will fall off of the truck! I am trying to bring awareness to this defect before it causes an accident. A call to the dealer and every post that i see says that toyota will not help. This is not an isolated issue and toyota should take responsibility for the poor workmanship and replace the defective parts before there are accidents. My frame is also rusted. Toyota dealer sprayed a solution on the frame but it is still rusting and is affecting this bed rust as well.

I have very bad rust in the bed of my 07 dc. I bought the truck new. The rust was obscured by the toyota bed liner until i saw other owners posting and checked it out. I keep my truck in immaculate condition and it only has 57,000 miles. The rust is coming from underneath and is focused around the bolts that hold the bed to the frame. I am afraid that the bed will fall off of the truck! I am trying to bring awareness to this defect before it causes an accident. A call to the dealer and every post that i see says that toyota will not help. This is not an isolated issue and toyota should take responsibility for the poor workmanship and replace the defective parts before there are accidents. My frame is also rusted. Toyota dealer sprayed a solution on the frame but it is still rusting and is affecting this bed rust as well.

Toyota tundra frame corroded. There is a baseball sized hole in my frame and toyota was notified of it and denied that is was their responsibility to repair issues related to improper anti corrosion treatment during manufacturing. They stated they had a campaign to resolve this issue but i was not notified by phone, fax, mail, email, or any other means.

Common OBD-II Error Codes

• C0140 [1] C0140
• C0141 [1] C0141
• U1400 [1] U1400
• P0335 [1] Crankshaft Position Sensor A Circuit Malfunction
• P0418 [3] Secondary Air Injection System Relay "A" Circuit Malfunction
• P0419 [3] Secondary Air Injection System Relay "B" Circuit Malfunction
• P2714 [1] Pressure Control Solenoid "D" Performance/Stuck Off
• P0894 [1] Transmission Component Slipping
• P0729 [1] Gear 6 Incorrect Ratio
• P0751 [1] Shift Solenoid A Performance or Stuck Off
• P0756 [1] Shift Solenoid B Performance or Stock Off
• P0766 [1] Shift Solenoid D Performance or Stuck Off
• P0781 [1] 1-2 Shift Malfunction
• P2757 [1] Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance/Stuck Off
• P0500 [1] Vehicle Speed Sensor "A" Malfunction
• U0129 [1] Lost Communication With Brake System Control Module
• P0552 [1] Power Steering Pressure Sensor Circuit Low Input
• P0553 [1] Power Steering Pressure Sensor Circuit High Input
• P0412 [1] Secondary Air Injection System Switching Valve A Circuit Malfunction
• P0415 [1] Secondary Air Injection System Switching Valve B Circuit Malfunction
• P2445 [1] Secondary Air Injection System Pump Stuck Off Bank 1
• P2447 [1] Secondary Air Injection System Pump Stuck Off Bank 2