P2714

Pressure Control Solenoid "D" Performance/Stuck Off

DTC P2714, sometimes indicated as P271400 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the causing pressure control solenoid "d" performance/stuck off.

The DTC P2714 code means that the pressure control solenoid "D" is not performing as expected, or is stuck off. This can be caused by a number of things, including a clogged or dirty oil filter, low oil pressure, or a malfunctioning solenoid.
If you have a P2714 code, the first thing you should do is check the oil level and condition. If the oil is low or dirty, top it off or change it, and see if that fixes the problem. If it doesn't, then you may need to have the solenoid replaced.

  • P2714: Control Solenoid D Performance/Stuck Off
  • P2714: Pressure Control Solenoid "D" Performance/Stuck Off
  • P2714: Transmission fluid pressure (TFP) solenoid D – performance problem or solenoid stuck off
  • P2714 00: Transmission fluid pressure (TFP) solenoid D - performance problem or solenoid stuck off

See Also: Related Error Codes
DTC Trouble Code Search
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • PIP5819B - POWER TRAIN
    CHEVROLET: This preliminary information communicates inspection and/or needed repairs for dtc P2714 on a vt40 cvt transmission
  • PIP5819A - EQUIPMENT
    CHEVROLET: This preliminary information communicates inspection and/or needed repairs for dtc P2714 on a vt40 cvt transmission
  • PIP5819 - POWER TRAIN
    CHEVROLET: This preliminary information communicates inspection and/or needed repairs for dtc P2714 on a vt40 cvt transmission
  • PIP5521 - EQUIPMENT ADAPTIVE/MOBILITY
    CHEVROLET: This preliminary information communicates to the dealer technician if they find P0871 or P2714 is set in the tcm to clear the codes and retest. If the codes do not reset dealer is to release the vehicle to the customer. If the codes reset t
  • PIP5521B - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
    CHEVROLET: This preliminary information communicates to the dealer technician if they find P0871 or P2714 is set in the tcm to refer to bulletin 19-na-053for updated information regarding codes P0871 or P2714 set in the tcm.
  • PIP4831E - POWER TRAIN
    CHEVROLET: This preliminary information communication advises the technician that vehicles to look for debris in the valve bodu for codesP0751, P0752, P0756, P0757, P0776, P0777, P0796, P0797, P2714 or P2715, and to review the date code on the transm
  • PIP5521A - POWER TRAIN
    CHEVROLET: This preliminary information communicates to the dealer technician if they find P0871 or P2714 is set in the tcm to clear the codes and retest. If the codes do not reset dealer is to release the vehicle to the customer. If the codes reset t
  • L-SB-0008-13 - POWER TRAIN
    LEXUS: Some 2008 ? 2011 model year lx 570 vehicles may exhibit a mil ?On? Condition with transmission performance dtcs such as P2714, P0751, P0756, P0761, P0766, P0729, P0781, P0894, P2757, or P0776 and/or abnormal transmission shifting. Revised e
  • T-SB-0084-08 Rev - POWER TRAIN
    TOYOTA: Some 2008 ? 2011 model year land cruiser vehicles may exhibit a mil ?On? Condition with transmission performance dtcs such as P2714, P0751, P0756, P0761, P0766, P0729, P0781, P0894, P2757, or P0776 and/or abnormal transmission shifting. Rev
  • PI-1131 - POWER TRAIN
    CHEVROLET: Gm: some vehicles may experience various missing gears. Various dtcs may be set such as P0776, P0796, P0878, P0873, P2714 or P2723. This may be caused by non-functioning pressure control solenoid. *js
  • T-SB-0170-09 - POWER TRAIN:AUTOMATIC TRANSMISSION
    TOYOTA: Toyota: automatic transmission/transaxle. Transmissions in sequoia and/or tundra vehicles may experience transmission slipping, mil on with transmission shift performance dtcs such as P2714, P0751, P0756, P0766, P0729, P0781, P0894, P2757
  • PIP4304 - POWER TRAIN:MANUAL TRANSMISSION
    CHEVROLET: Dtc P0878, P2714, P2723, transmission slips in 1st, 2nd, 3rd, or 4th gears and/or long garage shifts to drive, equipped with a 6l50 (myb), 6l80 (myc), or 6l90 (myd) transmission. *nj
  • 4292 - POWER TRAIN:AUTOMATIC TRANSMISSION
    CHEVROLET: Dtc P0756, P0796, P2714, P2723, tcc shudder or harsh engagement, harsh shifts, water in transmission - keywords code converter fluid torque. Equipped with 6l50, 6l80 or 6l90 (rpo's myb, myc, myd) automatic transmission. *nj
  • 4302 - POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
    CHEVROLET: Dtc P0751, P0756, P0776, P0796, P2714, P2723, harsh tcc engagement. Equipped with 6l80 (rpo myc) automatic transmission. *nj
  • 070730019 - POWER TRAIN:AUTOMATIC TRANSMISSION
    PONTIAC: 6t70/6t75 transmission - check engine light on, poor vehicle performance, dtcs P0716, P0717, P0722, P0723, P0751, P0756, P0776, P0796, P2714 or P2723 set (diagnosis and replace speed sensor. *nj
  • 070730004 - POWER TRAIN:AUTOMATIC TRANSMISSION
    PONTIAC: Automatic transmission-performance concerns, check engine light on, dtc's P0716, P0741, P0776, P0777, P0796, P0797, P0873, P0878, P0990, P2714, P2723, and P2724 set. *kb
Consumer Complaints for this DTC



2011 CHEVROLET MALIBU with 43070.0 miles

I am reporting this incident although it is a little over 3 years old, i was not aware of this website when this happened, because i feel it is related to the complaint i recently submitted, complaint number: 11045010, plus Chevrolet needs to be held accountable. On october 6th, 2014 at about 2pm i am getting on the expressway as i am about to merge with traffic and start to acceleration i feel a surge and than the check engine light comes on. When i am able to i pull over to the shoulder and contact the shop where i take my car to be serviced and set up an appointment to bring my car in the next morning. Brach's auto runs a engine diagnostics test and the codes are P0700 and P2714. The manager asks if my car is still under any warranty and it was still under the powertrain warranty so he suggests i contact Chevrolet. I first contact webb chevy oak lawn who was not able to give me an appointment until 2 weeks away so i contacted the Chevrolet customer care and spoke with a rep who helped me to set up an appointment with kingdom Chevrolet and to receive a gm rental. I was not allowed to use the licensed shop where i have my car serviced and they refused to pay the engine diagnostics fee i had already had completed. Kingdom Chevrolet came up with the same diagnostic codes as brach's auto and suggested a throttle body service and fuel injection service for running issues. After the work was completed i took it back to brach's auto to have them check it out and it was suggested that i do the throttle body service which i had completed.
POWER TRAIN,



2010 CHEVROLET MALIBU with 55000.0 miles

During driving, vehicle slips in/out/past 2nd gear (or no 2nd gear is available). No 6th gear available. Happens constantly in city or highway traffic. There is a manufacturer recall (dtc P2714) on other 2010 Chevrolet of the same model as well as several others for this same issue but the manufacturer states that the recall does not cover my vin.
POWER TRAIN,



2008 SATURN VUE with 94446.0 miles

Transmission fault and/or check engine light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723 on Saturn Vue vehicles with a 6speed automatic transmission may develop one or more of the following faults related to a broken 35r clutch wave plate inside the transmission: illumination of the check engine light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723, loss of reverse gear, slipping or harsh 3rd or 5th gear shift. Removal and dis-assembly of the transmission will be required to replace the broken 35r wave plate. It is also extremely important that all debris from the failed part be cleaned from the transmission while it is disassembled in order to try and prevent future problems this affected 4 model years: 2003, 2006, 2008 and 2009 why wasn't a recall done on this? Now i'm out of pocket for the expense of replacing my transmission.
POWER TRAIN,



2008 SATURN OUTLOOK with 76000.0 miles

I was driving home doing 35mph, when my car would not shift into gear and the engine light came on. I was able to get it home doing 5mph. My husband came out to take it for a drive and will not go into reverse. We had it put on the computer and a couple of different codes showed one of them being P0776. I have been looking on line and found many other complaints with this same problem. I also came across this: Saturn Outlook transmission fault and/or check engine light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723 Saturn Outlook problem model years affected: 2007, 2008, 2009 drive trains affected: 2wd, 4wd average mileage: 71,429 mi (39,000 mi - 118,879 mi) verified vehicles with a 6 speed automatic transmission may develop one or more of the following faults related to a broken 35r clutch wave plate inside the transmission: illumination of the check engine light with code P0716, P0776, P0717, P0777, P2714, P2715, and/or P02723, loss of reverse gear, slipping or harsh 3rd or 5th gear shift. Removal and dis-assembly of the transmission will be required to replace the broken 35r wave plate. It is also extremely important that all debris from the failed part be cleaned from the transmission while it is disassembled in order to try and prevent future problems.
POWER TRAIN,



2008 SATURN VUE with 74000.0 miles

Http://repairpal.Com/transmission-fault-andor-check-engine-light-with-code-P0716-P0776-P0717-P0777-P2714-P2715-an-567 how is the transmission not being recalled! Someone is going to get seriously hurt. Does it take a death before anything is done? Good grief!!
POWER TRAIN,



2007 TOYOTA TUNDRA with 140000. miles

My check engine light has come on. As well as the lights stating the vehicle stability control and traction control systems have been disabled. The transmission will not shift out of third gear and the vsc being off is causing an unsafe driving condition due to slipping tires around corners at normal speeds. Upon checking the engine code P2714 and P0751 i have come to find out there is an internal Toyota technical service bulletin circulating their dealership service departments dating back to november 28, 2007 when this issue was first discovered. The bulletin is named tc017-07. Also upon further investigation i have found numerous posts about this code and the exact issues my vehicle suffers from on multiple Toyota Tundra message and internet chat groups. This is a very serious issue which could easily cause loss of life or property if these vehicles with this issue are suddenly prone to the vsc and transmission acting abnormally. This issue for me came up very suddenly with no prior warning as the dash lights came in while driving. I will be asking totota to fix this issue at their cost with the remedy they describe in their service bulletin. The remedy they recommend is to replace the transmission and reprogram the ecm.
ELECTRONIC STABILITY CONTROL, POWER TRAIN



2007 SATURN OUTLOOK with 54000.0 miles

Issue began as a jerky movement in reverse. A few days later, high engine rpms were noticed during acceleration which eventually led to the check engine light being lit and the transmission being disengaged. No gears were operating and car was able to be pulled off the main roads with no incidents. Many online forums describe a similar issue with the gmc acadia, chevrolet traverse, and buick enclave as well and across several model years for each vehicle. Http://repairpal.Com/transmission-fault-andor-check-engine-light-with-code-P0716-P0776-P0717-P0777-P2714-P2715-an-459 http://repairpal.Com/transmission-fault-andor-check-engine-light-with-code-P0716-P0776-P0717-P0777-P2714-P2715-an-567 http://repairpal.Com/chevrolet-traverse-2009/problems http://repairpal.Com/gmc-acadia-2007/problems.
ENGINE, POWER TRAIN

Previous Code: P270A | Next Code: P2715