T-SB-0071-11 Rev
Service Bulletin Details
Public Details for: T-SB-0071-11 Rev
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid mil ?On,? Shifting issues, and/or transmission damage. Use the information in this bulletin when
- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 - 1994 - 1993 - 1992 - 1991 - 1990 -
Models from 2014
Models from 2013
Models from 2012
Models from 2011
Models from 2010
Models from 2009
Models from 2008
Models from 2007
Models from 2006
Models from 2005
Models from 2004
Models from 2003
Models from 2002
Models from 2001
Models from 2000
Models from 1999
Models from 1998
Models from 1997
Models from 1996
Models from 1995
Models from 1994
Models from 1993
Models from 1992
Models from 1991
Models from 1990
1990 TOYOTA 4RUNNER |
1990 TOYOTA CAMRY |
1990 TOYOTA CELICA |
1990 TOYOTA COROLLA |
1990 TOYOTA CRESSIDA |
1990 TOYOTA LAND CRUISER |
1990 TOYOTA MR2 |
1990 TOYOTA PICKUP |
1990 TOYOTA SUPRA |
1990 TOYOTA TERCEL |
T-SB-0071-11 Rev2 July 13, 2011 Automatic/Continuously Variable Transmission Replacement Precautions Service Category Drivetrain Section Automatic Transmission/Transaxle Market USA Applicability YEAR(S) MODEL(S) 1990 – 2014 4Runner, Avalon, Camry, Celica, Corolla, Cressida, Echo, FJ Cruiser, Highlander, Land Cruiser, MR2, MR2 Spyder, Matrix, Paseo, Pickup, Previa, RAV4, Sequoia, Sienna, Solara, Supra, T100, Tacoma, Tercel, Truck, Tundra, Venza, Yaris ADDITIONAL INFORMATION REVISION NOTICE October 1, 2013 Rev2: • Applicability has been updated to include 2014 model year vehicles. September 5, 2012 Rev1: • Applicability has been updated to include 2012 – 2013 model year vehicles. Any previous printed versions of this bulletin should be discarded. Introduction The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL “ON,” shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty – – – – © 2013 Toyota Motor Sales, USA Page 1 of 2 T-SB-0071-11 Rev2 July 13, 2011 Page 2 of 2 Automatic/Continuously Variable Transmission Replacement Precautions Precautions Confirm the following items: Both alignment pins are present on the engine block. ATF lines and cooler have been flushed with the appropriate ATF type. NOTE Continuously Variable Transmissions (CVT) require CVT fluid when flushing the cooler. Correct torque converter bolts and washers are used. NOTE Not all applications will use washers on the torque converter bolts. All ground straps are in the correct locations and are connected properly. Correct shift cable adjustment. Correct park neutral position switch adjustment. Transmission fluid level has been set properly. Transmission learned values have been reset and/or the compensation code has been input (if applicable) and proper initialization has been performed. © 2013 Toyota Motor Sales, USA