Toyota 4runner 1991

• Recall 51059 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  ck motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles manufactured by the vehicle manufacturers.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 61642 [USA]: If the vehicle is continued to be operated in this condition, the relay rod may fracture, increasing the risk of a crash.
  On certain pickup trucks and sport utility vehicles, if the steering wheel is repeatedly turned under certain conditions where high steering effort and power assist are required, for instance, when fully turning the wheel while the vehicle is stopped, a fatigue crack may develop in the steering relay rod.
  dealers will replace the steering relay rod. The recall began october 5, 2005. Owners may contact toyota at 1-800-331-4331.
  toyota recall no. Ssc 50n.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2005261 [Canada]: Steering
  On certain vehicles, if the steering wheel is repeatedly turned under conditions where high steering effort and power assist are required, for instance, when fully turning the wheel while the vehicle is stopped, a fatigue crack may develop in the steering relay rod. Correction: dealers will replace the steering relay rod.

  Show Content

• Recall 1998253 [Canada]: Structure
  Owners of affected vehicles operated in severe/high road salt use areas of ontario, quebec and the atlantic provinces will receive a toyota advisory letter. This letter will include a free-of-charge vehicle undercarriage wash and inspection. Subsequently, owners will be advised of any services, if applicable.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Toyota 4runner 1991 as well as their FCC IDs if available

• ASP-C-30-120: 1989-1995 Toyota 4Runner Pickup / TR40 / Ignition Lock Cylinder / Coded / C-30-120 (ASP)
• ASP-D-30-112: 1989-2004 Toyota Pickup 4Runner / TR40 / RH Driver Door Lock Cylinder / D-30-112 (ASP)

• Rear seat belt routing investigation # DP02002

  
  

  Show Content

• Corroded brake lines investigation # SQ99003

  Toyota is conducting a safety recall in canada 98-253. Corroded brake lines could fail resulting in a partial brak system loss and increased stopping distances
  

  Show Content

• Loss of brk effectiveness investigation # EA92011

  There is no summary currently available
  

  Show Content

• Loss of brake effectivenes investigation # PE91147

  ===
  

  Show Content

Back in august 2016 i purchased and installed 4 new tires, i cleaned and painted wheels before installing 4 new slime tire valves #tr 415 slime part# 20261 i purchased these valves at walmart in somerset, ky the date code on package was 08.26.14 i purchased (8) packs 16 total valves ( i still have 3 packs that i have not opened). I have a tire changer on my farm and do my own tire service. On 09-26-2017 i had a tire failure on my toyota while driving notice slight pull. After stopping and installing spare i determined that all 4 valves i put on last year were dry rotted (cracked). I keep this vehicle in barn when not being driven (no sun damage should occured. I checked a trailer that i had applied new valves on from the same lot of valves, they to were dry rotted and one was flat. These products are dangerous to use, the valves will pull apart with light pulling from fingers. These products need to be recalled. I did not contact walmart about this failure due to product purchased from them not made by them! I did contact slime.Com with no reply back as of 09-27-2017.

While driving in the street at 40 mph, it accelerates for no reason. I could not stop, the brake put hard, did not respond to any change and engine speed increased to more than 5000. I had to turn it off still running. To turn it back on, it will not do so again.

Oem standard tires are 225/75r15 on toyota steel wheels. Oem factory option tires are w/31x10.5 on toyota brand aluminum wheels. The factory official sticker shows the option tires as factory-installed. The driver door pillar sticker shows the factory-installed tire as 225/75r15. The pillar sticker is wrong due to defect in the manufacturing process. In reliance on the pillar sticker, a tire technician installed replacement tires based on the standard size. The standard tire is significantly smaller in diameter than the factory option tire. Safety issues: 1) speedometer error ~10%, causing mismatch to posted limit and foreseeable tailgating and other adverse behaviors by surrounding drivers; 2) degraded stability on high-center of gravity suv due to mismatch between factory option spare tire and replacement tires based on erroneous pillar sticker. *tr

Tl* the contact owns a 1991 toyota 4-runner. The contact stated that the vehicle was taken to have the exhaust inspected and was told that the frame was severely rusted and the vehicle was unsafe to drive. The mechanic also stated that the frame was fracturing from the underbody shields, which was also severely rusted. The vehicle was not repaired. The failure mileage was 164,000 and the current mileage was 165,000. Updated 4/11/2011 *cn the consumer stated the damage was hidden by the valance and was located where the tow hook was. Also, the factory press plate in the frame was rotted, which allowed moisture in the frame. Updated 04/27/11

Brought my 1991 4runner into concord (ca) toyota dealer for recall nhtsa campaign id number : 05v389000, for :component: steering:linkages:rod:relay:connecting after receiving the vehicle, there is too much "play" (movement) in the steering wheel, and the front wheels "wobble" badly in certain situations, creating unsafe driving conditions. The problems appear to be front end-end/alignment related. I did not have these problems prior to taking this is in for the recall. The asst svc mgr at the dealer insists that their work did not cause the issue, and that there is now another bad part on my front-end component that must be replaced, at my cost, to fix this (safety) issue. Please help asap - my vehicle is at the dealership now (01/03/06)*cn

Car over heated and cut off. Now leaking water into spark plugs.*ak

Blown head gasket, 1991 toyota v6 4runner, recalled in 1998 for the problem, corrected and gasket failed again in 2007. *nm

1991 toyota 4runner steering failed when turning wheel. *ts ***no answer required*** the consumer received a recall notice regarding the steering linkages two months after the accident. *jb *nm

Corrosion on the break lines from poor design in allowing sand and dirt to accumulate and cause the line to rust through and create a break failure. The rust created a little larger then a pin hole that aloud the rapid lost of break fluid which caused the loss of stopping and almost caused sever damage and injury to same. *nm