PIT4534G
Service Bulletin Details
Public Details for: PIT4534G
This preliminary information communication provides information to the technician about vehicle that have the driver information center button inoperative. Technician will insure the connectors to the instrument panel cluster and the dic wi
- 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2017
| 2017 BUICK ENCLAVE |
| 2017 CHEVROLET TRAVERSE |
| 2017 GMC ACADIA |
Models from 2016
| 2016 BUICK ENCLAVE |
| 2016 CHEVROLET TRAVERSE |
| 2016 GMC ACADIA |
Models from 2015
| 2015 BUICK ENCLAVE |
| 2015 CHEVROLET TRAVERSE |
| 2015 GMC ACADIA |
Models from 2014
| 2014 BUICK ENCLAVE |
| 2014 CHEVROLET TRAVERSE |
| 2014 GMC ACADIA |
Models from 2013
| 2013 BUICK ENCLAVE |
| 2013 CHEVROLET TRAVERSE |
| 2013 GMC ACADIA |
Models from 2012
| 2012 BUICK ENCLAVE |
| 2012 CHEVROLET TRAVERSE |
| 2012 GMC ACADIA |
Models from 2011
| 2011 BUICK ENCLAVE |
| 2011 CHEVROLET TRAVERSE |
| 2011 GMC ACADIA |
Models from 2007
| 2007 GMC ACADIA |
| 2007 SATURN OUTLOOK |
Bulletin No.: PIT4534G Published date: 11/10/2020 Preliminary Information PIT4534G Diagnostic Tip - Driver Information Center (DIC) Switch Buttons Are Inoperative Models Brand: Model: Model Years: VIN: from to Engine: Transmissions: GMC Acadia 2007 - 2016 All All All All GMC Acadia Limited 2017 All All All All Buick Enclave 2008 - 2017 All All All All Chevrolet Traverse 2007 - 2017 All All All All Saturn Outlook 2007 - 2010 All All All All Supersession Statement This PI was superseded to update Model Years. Please discard PIT4534F. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition / Concern The driver information center (DIC) switch buttons are inoperative after the following service procedures: · Replacing the DIC switch. · Replacing the instrument panel cluster (IPC). · Disconnecting the DIC switch during a service procedure. · Disconnecting the IPC during a service procedure. This occurs because the IPC needs to see the presence of the DIC switch at the time of battery power connect to the IPC. If the IPC does not detect the DIC switch at power up, the switch will be inoperative. To prevent this condition, always remove battery power to the IPC after service is performed to either the DIC switch or the IPC. Recommendations / Instructions Make sure that all of the connectors to the IPC and the DIC switch are connected and then remove the IPC/DSPLY fuse. Reinstall the fuse after a few seconds to return the function of the DIC switch to normal. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. © 2020 General Motors. All Rights Reserved.