TSA-20-01 R02

SERVICE ADVISORY
Release Date: December 17, 2020
Expiration Date: December 17, 2021
SLI
Communication #: TSA-20-01
Model Year(s): 2020
— Confidential and Proprietary —
VERSION: R02 (December 18, 2020)
**Updated Digital Wrench version and added Engine Idle Learn Procedure**
IMPORTANT
If you are working with a printed copy, please verify you have the most current version of this document.
SUBJECT: 2020 AUTODRIVE CALIBRATION ENHANCEMENTS
PURPOSE
Slingshot has released updated Engine Control Module (ECM) and Transmission Control Module (TCM) calibrations to
provide smoother transmission shifts, improved vehicle behavior when coming to a stop, and improved low speed
drivability.
NOTICE
The TCM update is also installed during an ECM calibration update or installation of an accessory programming such as
the Stage 1 ProStar 2.0L tune, add-on paddle shifters, or hill hold feature. Vehicles already equipped with a Stage 1
calibration will receive the TCM update and the most current stage 1 calibration at the time of the update.
AFFECTED MODELS
MODEL YEAR
VEHICLE IDENTIFICATION NUMBER
RANGE
MODELS
Slingshot R with AutoDrive
2020
Slingshot SL with AutoDrive
Slingshot GT with AutoDrive
Reference Unit Inquiry on the dealer website or
the Service Communications list on the STOP
site to lookup affected VINs.
NOTICE
Slingshot models equipped with Manual Transmissions are not affected.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-20-01 (R02)
© 2020 Polaris Inc.
Page 1 of 5
WARRANTY CLAIM PARTS INFORMATION
2020 SLINGSHOT
Advisory #
TSA-20-01
Claim Type
SA (Service Advisory)
Labor Allowance
0.5 hours (30 minutes)
Part Number / Description
0000541 (QTY 1) Bulletin Misc Labor
Parts Availability
NA
University of Polaris Video Training
Required
NO
COVERAGE PERIOD
Coverage will begin on December 17, 2020. Coverage will expire on December 31, 2021.
FEEDBACK FORM
A feedback form has been created for the technician to provide Polaris with an overall satisfaction
rating for the instructions, provide comments on your experience or upload pictures/video. This
feedback form is viewable on a mobile device by scanning the QR code or by clicking HERE if
viewing this document electronically.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-20-01 (R02)
© 2020 Polaris Inc.
Page 2 of 5
ECU REPROGRAMMING
1. Verify that Digital Wrench version 4.2 Update 12/18/
2020 or later has been installed on your PC or laptop
and proceed to step 6.
5. Download and install Digital Wrench Version 4.2 –
Update 12/18/2020 or higher.
If you do not have Version 4.2 – Update 12/18/2020
or later installed, you must first download it before
proceeding with the reflash.
NOTICE
If you do not have Digital Wrench installed on your
computer, you must first download the Digital Wrench
Base Version Installer (STEP 2).
2. To download Digital Wrench Base Version, go to your
dealer homepage and select Digital Wrench Base
Version Installer from the Service and Warranty
dropdown menu and download.
6. Connect MultiLink XP cables to PC and vehicle.
7. Open the Digital Wrench program.
8. Select the model year, product line, and vehicle
description by selecting the “Change Vehicle Type” icon
.
NOTICE
International Subsidiaries and Distributors use the Digital
Wrench Subscriptions link to purchase and update your
digital wrench software.
3. Once the Base Version is installed, go to your dealer
homepage and select Digital Wrench Updates from
the Service and Warranty dropdown menu.
9. Power the vehicle to the “Ignition” mode by pressing the
start button twice.
IMPORTANT
Make sure the vehicle battery is fully charged or
connected to a battery charger before proceeding.
10. Select the Special Test Tab q.
4. Click on Digital Wrench Version 4.2 Updates.
11. Select Accessory Option Install w.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-20-01 (R02)
© 2020 Polaris Inc.
Page 3 of 5
AUTODRIVE SYSTEM BREAK-IN
12. Select Upgrade to MY21.
1. Press the start button twice to power the vehicle to
Ignition Mode.
2. Run Digital Wrench >> Special Tests ”Transmission
Service Procedures”.
NOTICE
Digital Wrench will automatically identify current software
levels and determine which modules require software
updates.
3. Select “Grid Learn”, then Done.
13. Follow the on-screen prompts until all control modules
have been updated. Entering an Authorization Key is
not necessary.
NOTICE
This will program the ECM to a no start program, then
program the TCM, then program the ECM to the final
version.
14. Once the flash is complete, click the red X.
15. Turn vehicle power off for at least 10 seconds (press
start button, pull park brake).
4. Follow the on-screen prompts for Grid learn.
NOTICE
Grid learn will shift into Reverse three times to indicate it is
complete
5. Turn vehicle power off for at least 10 seconds (press
start button, pull park brake).
6. Press the start button twice to power the vehicle to
Ignition Mode.
7. After completing the grid learn, the process will flow into
the clutch ”Kiss Point Learn”.
NOTICE
If the “Kiss Point Learn” procedure doesn’t start following
the “Grid Learn”, select “Kiss Point Learn” in
“Transmission Service Procedures”.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-20-01 (R02)
© 2020 Polaris Inc.
Page 4 of 5
8. Follow the on-screen prompts to complete the Kiss
Point Learn
9. Turn vehicle power off for at least 10 seconds (press
start button, pull park brake)
10. Perform IDLE RELEARN procedure:
a. Start engine and run at idle until the engine reaches
operating temperature of 190° F.
b. Slowly increase RPM to the 3000–5000 RPM range.
c. Return the engine to idle for 5 consecutive seconds.
d. Repeat engine 3000–5000 RPM range and 5
second idle TWO more times for a total of three.
e. Turn vehicle power off for at least 10 seconds (press
start button, pull park brake).
f. Start engine and run at idle until the engine reaches
operating temperature of 190° F.
g. Repeat steps B-E TWO more times, for a total of
three idle relearn cycles.
11. Disconnect MultiLink XP cables from the vehicle.
12. Start the engine, and select Drive "D-Button."
13. On a flat smooth surface, slowly accelerate until the
vehicle reaches 10–12 mph and then back to a
complete stop.
IMPORTANT
Repeat this step six times.
14. Turn vehicle power off for at least 15 seconds (press
start button, pull park brake)
15. Connect MultiLink XP cables to PC and vehicle.
16. Create a service report using Digital Wrench >> Special
Tests >> Service Report.
17. Check / clear any stored fault codes, disconnect Digital
Wrench and test ride the vehicle.
18. File a SA claim for TSA-20-01.
The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the written
consent of Polaris Inc.
TSA-20-01 (R02)
© 2020 Polaris Inc.
Page 5 of 5