20-BD-016H-1
Service Bulletin Details
Public Details for: 20-BD-016H-1
Certain santa fe (tma) and palisade (lx2) vehicles may exhibit noise coming from the second row seat track. This bulletin provides information on how to inspect and if necessary repair the condition.
Models from 2021
2021 HYUNDAI PALISADE |
Models from 2020
2020 HYUNDAI PALISADE |
2020 HYUNDAI SANTA FE |
Models from 2019
2019 HYUNDAI SANTA FE |
GROUP NUMBER Body 20-BD-016H-1 DATE Technical Service Bulletin MODEL(S) December, 2020 Santa Fe (TMa) Palisade (LX2) SECOND ROW SEAT TRACK NOISE REPAIR SUBJECT: This TSB supersedes 20-BD-016H by updating the applicable vehicles to Santa Fe (TMa) vehicles built before 8/1/2019. Description: Certain Santa Fe (TMa) and Palisade (LX2) vehicles may exhibit noise coming from the second row seat track. This bulletin provides information on how to inspect and if necessary repair the condition. Applicable Vehicles: All 2020MY and newer Palisade (LX2) vehicles All 2019 – 2020MY Santa Fe (TMa) vehicles built before 8/1/2019 Parts Information: PART NAME Part Number TRACK LOCATION PIN TUBE Figure QTY 89130-S1A00FFF 4 Warranty Information: MODEL OP CODE OPERATION OP TIME 89130F01 REAR SEAT NOISE INSPECTION 0.3 M/H REAR SEAT NOISE INSPECTION AND LOCATION PIN TUBE REPLACEMENT (ONE SIDE) 0.4 M/H REAR SEAT NOISE INSPECTION AND LOCATION PIN TUBE REPLACEMENT (BOTH SIDES) 0.5 M/H Santa Fe 89130F02 (TMa) Palisade (LX2) 89130F03 CAUSAL PART 89130S1A00FFF NATURE CAUSE CODE CODE Q55 ZZ7 NOTE: Normal warranty applies. Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair SECOND ROW SEAT TRACK NOISE REPAIR SUBJECT: Service Procedure: 1. Tap the upper portion of the rear seat back 10+ times to inspect for noise. Perform this inspection on all rear seat backs. NOTICE If noise is not heard, this TSB does not apply. NOTICE This TSB only applies to rear seats with a sliding track. If the rear seats have a fixed track, this TSB does not apply. 2. If noise is heard from a rear seat back, carefully remove the affected rear seat (A) using the applicable vehicle shop manual section below: A Body (Interior and Exterior) ! Rear Seat Rear Seat Assembly Repair Procedures CAUTION Do not damage the seat or vehicle components during removal. TSB #: 20-BD-016H-1 Page 2 of 4 SUBJECT: SUBJECT: 3. SECOND ROW SEAT TRACK NOISE REPAIR Place the rear seat on a workbench, and locate the track location pins (B). B 4. Use a utility knife to cut the existing location pin tubes (C). C 5. Remove and discard both location pin tubes. C TSB #: 20-BD-016H Page 3 of 4 SUBJECT: SECOND ROW SEAT TRACK NOISE REPAIR SUBJECT: 6. Replace both location pin tubes with the new tubes (K). D D 7. Use a heat shrink gun to heat the location pin tubes. ! CAUTION Heat all sides evenly. After heating, the tube should not rotate. 8. Reinstall all parts in reverse order of removal. 9. The service procedure is now complete. TSB #: 20-BD-016H-1 Page 4 of 4 SUBJECT: