09-016-16-3158

Service Bulletin
Mazda North American Operations
Irvine, CA 92618-2922
© 2016 Mazda Motor of America, Inc.
Subject:
Bulletin No:
09-016/16
Last Issued:
03/07/2016
WRINKLES ON LEATHER SEAT SURFACE OF NEW VEHICLE
MULTI-MODEL - WRINKLES ON LEATHER SEAT SURFACE OF NEW VEHICLE
BULLETIN NOTE
• This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside
the change bars.
• Please print a copy of this bulletin for the upholstery repair specialist.
Previously issued TSBs:
Date issued:
09-015/12
03/23/2012
APPLICABLE MODEL(S)/VINS
2015-2016 Mazda3
2015-2016 Mazda6
2015-2016 Mazda CX-5
2015-2016 Mazda5
2016 Mazda CX-3
2015-2016 Mazda CX-9
2015-2016 Mazda MX-5
DESCRIPTION
At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat
cushion and/or seat back surface.
Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist
using the following repair procedure.
Wrinkles on seat cushion
Wrinkles on seat back
Page 1 of 8
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
NOTE:
•
•
•
A qualified upholstery repair specialist is required for this repair procedure.
Explain to the customer before performing the repair that the wrinkles may not be completely
removed.
Explain to the customer that the leather may develop some wrinkles due to aging or wear during
normal use. This is normal behavior of the leather material.
EQUIPMENT INFORMATION
1
Steamer - Commercial type
2
Lint-free cloths
3
Spray bottle (with water)
4
(Optional) Heat gun with variable heat control
Page 2 of 8
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
REPAIR PROCEDURE
There are two (2) repair methods available for this repair:
COMMERCIAL STEAMER METHOD
This is the preferred method. This method should resolve most
customer concerns.
HEAT GUN METHOD
This is NOT the preferred method. Only use this method if the
COMMERCIAL STEAMER METHOD is not sufficient.
COMMERCIAL STEAMER METHOD
Note:
•
•
•
A qualified upholstery repair specialist is required for this repair procedure.
Always follow the manufactures instructions for the steamer and heat gun.
Do not apply the steamer head directly to the perforated sections of the leather seat surface (A).
B - Non-perforated leather seat surface
A - Perforated leather seat surface
Page 3 of 8
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
1. Use a clean lint-free cloth to cover all seat belt buckles.
CAUTION:
• Do not spray water on the seat belt buckles.
• Do not apply the steamer head directly on the latch anchor location buttons.
Page 4 of 8
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
2. Choose one area at a time to work on. Apply the steamer head directly on the wrinkle until the upholstery
material becomes warm. Move the steamer head in a outward motion (similar to ironing a shirt). Repeat until
the wrinkles are removed to an acceptable level.
CAUTION:Do not apply steam directly on the perforated sections of the leather seat surface.
If necessary, use your hand to work out the wrinkles by applying firm pressure in a outward motion. This
step can be repeated as long as the upholstery material is warm. If the upholstery material feels cool, reapply steam.
3. Repeat step #2 until the wrinkles are removed to an acceptable level.
NOTE: Direct heat may be necessary to aid in the removal of some wrinkles. Refer to HEAT GUN
METHOD.
Page 5 of 8
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
Before
After
CAUTION:
• Do NOT keep the steamer head at the same place for a long time.
• Do NOT run the steamer head without a water-soaked cloth especially over seat trim beading
and seat side trim area.
• Seat damage may occur if the caution points above are nor followed as shown below.
Damaged seat side trim
Damaged seat trim beading
Page 6 of 8
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
HEAT GUN METHOD (optional)
1. Use a water spray bottle to pre-soak a lint-free cloth.
2. Use a heat gun with variable heat control. Set the heat range to the lowest setting.
CAUTION:
• Do not apply direct heat on the perforated sections of the leather seat surface.
• Do not apply direct heat on the upholsteries’ stitching or beading.
• Do not apply direct heat on the latch anchor location buttons.
Hold the heat gun at least 5 inches away from the upholstery material. Apply heat in a circular motion.
Once the upholstery material reaches a warm temperature, use the pre-soaked cloth to apply firm hand
pressure in a outward motion.
Page 7 of 8
Bulletin No: 09-016/16
Last Issued: 03/07/2016
© 2016 Mazda Motor of America, Inc.
WARRANTY INFORMATION
NOTE:
•
•
•
This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
This repair will be covered under Mazda’s New Vehicle Limited Warranty term.
Additional diagnostic time cannot be claimed for this repair.
Warranty Type
A
Symptom Code
87
Damage Code
9E
Part Number Main Cause
Refer to EPC part number of concerned seat
Quantity
0
Operation Number / Labor Hours:
XXG23ARX / 0.0 Hrs. (1 seat)
XXG23BRX / 0.0 Hrs. (2 seats)
XXG23CRX / 0.0 Hrs. (3 seats)
XXG23DRX / 0.0 Hrs. (4 & 5 seats)
XXG23ERX / 0.0 Hrs. (6 seats)
XXG23FRX / 0.0 Hrs. (7 seats)
NOTE: Select correct labor operation number
for the number of seats requiring repair.
UPHOLSTERY REPAIR SHOP
Cost to repair leather seats
Sublet Invoice Number
Number from the upholstery repair shop invoice or dealer purchase order.
Sublet Type Code
Enter “F6”
Sublet Amount
Enter the upholster shop invoice amount. No mark-up allowed.
Page 8 of 8