Warranty Registr

Warranty Registration
Product has been pre-registered, now we want to register the product to the End User for warranty
VIN: Example1234567890
Evaporator Serial Number: ExampleEvap
Condenser Serial Number: ExampleCond
Compressor Serial Number: ExampleComp
From My Home Page, select iWarranty
Select New Product Registration
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Select Binocular next to Product Serial #
Enter VIN and select GO
Select one of the Components
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Enter Mileage at time of Delivery
Warranty Registration Instructions
Rev:0
Enter Delivery Date (MM/DD/YYYY) Enter First Used Date (MM/DD/YYYY)
3/3/2014
R.Krajcsik
Warranty Registration
Next Enter the End User information: For First Time End Users you will select Add New Customer
Enter Name, Address, City, State and Zip, and then create Customer Code
Create a Customer Code
Customer Code is a unique code
the dealer creates for this particular
customer. It may be all alpha, all
numeric or alpha numeric
characters. If this is a repeat
customer the same code can be
used each time.
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
End user information added
Customer Code added
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Once all information is proved then hit Submit
Once saved you will receive the following message and status will change to Registered
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Once the initial product is registered to an End User the dealer can use the Quick Registration format to
register equipment.
From My Home Page, Select iWarranty
Then select Quick Registration
Then click on Binocular next to Product Serial #
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Enter VIN and select GO
You will see 1 component has been registered and 2 are available to register
Select one of the un-registered components add the requested information
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Provide Delivery Date (MM/DD/YYYY) First Used Date (MM/DD/YYYY) Customer Code and Delivery Dealer Code
Customer Code is the unique code you created for this customer Good’s Bus Service (Customer Code
GBS)
Delivery Dealer Code is you account number
Then select Add More to add additional components until all components selected.
Select Binocular next to Product Serial # for second component
Select the next component to be registered
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
Once all components are selected hit Save
Once saved you will receive the following message
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik
Warranty Registration
To confirm registration go back to My Home Page and select Product Registration
Entire VIN and select GO
The product is registered to the End User
Warranty Registration Instructions
Rev:0
3/3/2014
R.Krajcsik