JLRTB02074NAS1

3/19/2021
TECHNICAL BULLETIN
JLRTB02074NAS1
TECHNICAL BULLETIN
01 MAR 2021
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a specific vehicle.
INFORMATION
SECTION:
501-19
SUBJECT/CONCERN:
Front Bumper Towing Eye Cover - Modification
AFFECTED VEHICLE RANGE:
MODEL:
F-PACE (X761)
MODEL YEAR:
2021
VIN:
663013-670434
ASSEMBLY PLANT:
Solihull
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616141182616
1/4
3/19/2021
TECHNICAL BULLETIN
SITUATION:
On vehicles with the 'Black Pack' trim option installed, a technician may have difficulty
installing the front bumper towing eye cover during completion of the Pre-Delivery
Inspection (PDI).
CAUSE:
The towing eye cover has been manufactured away from the required specification. .
ACTION:
Follow the instructions below.
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
99.01.52
0.3
FJ
T4A39063LML
DESCRIPTION
JLRTB - Front towing eye cover Modification
NOTE:
Normal Warranty procedures apply.
SERVICE INSTRUCTION:
1.
Raise and support the vehicle using a suitable 2-post li , (see TOPIx workshop
manual section 100-02: Description and Operation - Li ing).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616141182616
2/4
3/19/2021
TECHNICAL BULLETIN
2.

Remove the front towing eye cover.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616141182616
3/4
3/19/2021
TECHNICAL BULLETIN
3.
CAUTION:
Do NOT increase the depth of the slotted area.

Using a suitable tool, modify the front towing eye cover, as shown in the
illustration. Make sure an equal amount of material is removed from each side of
the slotted area, which will allow the slotted area to remain central, between the
fixing tabs.
Slotted area marked 'A' - 106 mm wide.
Slotted areas marked 'B' - 50 mm wide.
4.
Reverse steps 1 and 2.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1616141182616
4/4