NTB21-016
Service Bulletin Details
Public Details for: NTB21-016
Voluntary service campaign 2020 titan/titan xd rear combination lamp replacement introduction nissan is conducting this voluntary service campaign, on certain specific model year 2020 titan and titan xd models, to replace the rear co
- 2020 -
Models from 2020
2020 NISSAN TITAN |
Classification: Reference: EL21-006 Date: NTB21-016 March 3, 2021 VOLUNTARY SERVICE CAMPAIGN 2020 TITAN/TITAN XD REAR COMBINATION LAMP REPLACEMENT CAMPAIGN ID #: APPLIED VEHICLES: PC796 2020 Titan/Titan XD (A61) Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary service campaign, on certain specific model year 2020 Titan and Titan XD models, to replace the rear combination lamp assemblies. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC796 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer’s inventory. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/2 SERVICE PROCEDURE 1. Replace both the right hand (RH) and left hand (LH) rear combination lamps. 2. Refer to the Electronic Service Manual (ESM): section DRIVER CONTROLS > EXTERIOR LIGHTING SYSTEM > HALOGEN HEADLAMP/LED HEADLAMP > REMOVAL AND INSTALLATION > REAR COMBINATION LAMP > Removal and Installation. Destroy the original rear combination lamps by drilling 3 holes in both right and left lenses. PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY COMBINATION LAMP ASSY-REAR, RH 26550-9FV2A (1) 1 COMBINATION LAMP ASSY-REAR, LH 26555-9FV2A (1) 1 COMBINATION LAMP ASSY-REAR, RH 26550-9FV2B (1) 1 COMBINATION LAMP ASSY-REAR, LH 26555-9FV2B (1) 1 (1) Use the Electronic Parts Catalog to look up the rear combination lamp assembly by VIN. CLAIMS INFORMATION Submit a “CM” line claim using the following claims coding: CAMPAIGN (“CM”) ID PC796 DESCRIPTION Replace both rear combination lamps and destroy original lamps OP CODE FRT PC7960 0.4 hrs AMENDMENT HISTORY PUBLISHED DATE REFERENCE March 3, 2021 NTB21-016 DESCRIPTION Original bulletin published 2/2 NTB21-016