NTB13042

Classification :
BT13-004
Referen ce:
D ate:
NTB13-042
April 9, 2013
2013 ALTIMA SEDAN; BUZZ / RATTLE NOISE FROM
FRONT DOORS DURING AUDIO SYSTEM USE
APPLIED VEHICLE: 2013 Altima Sedan (L33)
IF YOU CONFIRM:
A buzz or rattle type noise is coming from either front door ONLY when operating the
audio system with a lot of bass.
•
•
The noise stops when applying pressure to the top of the front door power window
and door lock switch finisher(s).
ANY noises heard from any other area under the same conditions are not related
to this incident.
ACTION:
Replace both front door power window and door lock switch finishers.
•
For replacement procedure, refer to the K BODY EXTERIOR, DOORS, ROOF &
VEHICLE SECURITY>PWC Power Window Control System section of the ESM.
CAUTION: The pull handle outer finisher must be removed before removing each
front door power window and door lock switch.
NOTES:
¾ Do not remove the front door finishers (door panels) when removing the power
window and door lock switches. It is not necessary.
¾ Do not replace the front door power window and door lock switches OR speakers
for this incident, if it should occur.
¾ This bulletin does not apply to similar noises in areas other than the front door
power window and door lock switches during audio system use. For noises other
than described above, refer to the J BODY INTERIOR > INT Interior > SQUEAK
AND RATTLE TROUBLE DIAGNOSES section of the Electronic Service Manual
(ESM).
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians
are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
DESCRIPTION
PART #
COLOR CODE
QTY
Finisher-Power Window Switch, Front RH
80960-3TA0A
G or Z (black)
Finisher-Power Window Switch, Front LH
80961-3TA0A
G or Z (black)
Finisher-Power Window Switch, Front RH
80960-3TA0B
C (tan)
Finisher-Power Window Switch, Front LH
80961-3TA0B
C (tan)
*
*
*
*
* Order one (1) finisher of the correct color per door per vehicle.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
ZE
32
(2)
UH45AA *
(1) Reference the Parts Information Table and use the applicable Part Number as the
Primary Failed Part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated flat rate
time.
* This operation code should be claimed twice on the same repair line.
RPL WINDOW SWITCH FINISHER
(1)
2/2
NTB13-042