PC249

Nissan Aftersales Division
Electronic Field Communication
INFORMATION
Date: October 11, 2013
Subject:
PC249 - 2014 Altima Floor Support Weld - Dealer Inventory Inspection
Details:
Nissan is conducting a dealer inventory inspection to inspect the floor support welds on
certain specific MY14 Altima vehicles.
There are approximately 226 vehicles in dealer inventory.
Vehicle Identification – Dealer Inventory:
2014 Nissan Altima vehicles subject to this inspection can be identified through two
methods:
 SERVICE COMM – Beginning October 12, dealer service departments can complete
an inquiry on SERVICE COMM – I.D. PC249 - to determine an affected vehicle.
 VIN List – As a courtesy, posted with this announcement is a list of affected dealer
inventory VINs by region, district, and Dealer Code. This VIN list is available on
NNAnet.com under My Documents Sales>Campaigns>, Parts>Campaigns>,
Service>Campaigns> categories.
NOTE: Nissan requires dealers to perform this procedure on affected vehicles in
their inventory prior to being retailed.
Repair Procedures:
If the vehicle passes the weld inspection detailed in the technical procedure the vehicle may
be released.
If the vehicle does not pass the inspection:
 Continue to hold the vehicle.
 Send E-mail to the address: [email protected]
Make sure to include the below information:
Dealer Code
VIN
Number of Welds Confirmed
Contact Person Name
Phone Number
This service action procedure will be available on ASIST and NNAnet.com.
 ASIST – Go to “Tech Support Info” on the left column of the ASIST opening page.
Under “Tech Support Info”, select “Inventory Vehicle Actions”. A new window will
open where you may access the technical procedures.
 NNAnet.com – This procedure can be found on NNAnet.com under My Documents in
the following categories:
o Sales>Campaigns>
o Parts>Campaigns>
o Service>Campaigns>