ITB13035A

Classification:
Reference:
Date:
AT13-019a
ITB13-035a
August 18, 2014
CVT FLUID LEVEL CHECK SERVICE INFORMATION
The APPLIED VEHICLES section has been revised. No other changes have been made.
Please discard all previous versions of this bulletin.
APPLIED VEHICLE: 2013 JX35 and 2014-2015 QX60 (L50)
APPLIED VIN and DATE: Vehicles built AFTER 5N1AL0M(* *)DC 343902 and March 26, 2013
APPLIED TRANSMISSION: Vehicles equipped with CVT ONLY
SERVICE INFORMATION
Applied vehicles equipped with a CVT have a “cap” that appears to be a fluid level gauge. This “cap” will NOT
have a gauge or “dipstick”. This is normal. Do NOT replace the “cap” because it is thought to have a “dipstick”.
The fluid level is not checked from this location. The fluid level for applied vehicles is checked from the oil pan
(refer to the appropriate section of the Electronic Service Manual (ESM)). Whenever checking, filling, or topping
off a CVT’s fluid level of an applied vehicle for any reason, use the procedure outlined in the appropriate section
of the ESM.
No gauge
“CAP”
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you
believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to
determine if this applies to your vehicle.
1/1