ITB15027

Classification:
Reference:
Date:
EL15-027
ITB15-027
September 15, 2015
2014 – 2015 Q50 AND Q50 HYBRID;
TRUNK RELEASE POWER CANCEL SWITCH SERVICE INFORMATION
APPLIED VEHICLES: 2014-2015 Q50 (V37)
2014-2015 Q50 Hybrid (V37)
SERVICE INFORMATION
If the glove box is removed for any reason (for example, installing an accessory kick plate, replacing an in-cabin
microfilter, etc.), verify the trunk release power cancel switch operates normally after installing the glove box.

Before releasing the vehicle, operate the trunk opening with the trunk lid release switch located on the
instrument panel to confirm it operates correctly.
CAUTION: Be careful when disconnecting and connecting the trunk release power cancel switch to
avoid damaging it.
Glove box – top side
Trunk release
power cancel
switch connector
Glove box lamp connector
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/1