ITB16009

Service Bulletin Details

Public Details for: ITB16009

Service information the function to detect the last item to trigger the vehicles theft alarm system can now be accessed with consult-iii plus (c-iii plus). This function can be accessed by selecting: * diagnosis (all systems) or di


- 2015 - 2014 - 2013 -

Models from 2013
2013 INFINITI JX
Classification:
Reference:
Date:
EL16-002
ITB16-009
January 15, 2016
INFINITI; THEFT ALARM TRIGGER HISTORY FUNCTION
APPLIED VEHICLES:
2013 JX (L50)
2014-2015 QX60 (L50)
2014-2015 QX60 Hybrid (L50)
2014-2015 Q50 (V37)
2014-2015 Q50 Hybrid (V37)
SERVICE INFORMATION
The function to detect the last item to trigger the vehicles theft alarm system can now be accessed with
CONSULT-III plus (C-III plus).
This theft alarm history information can be used to confirm what triggered a past theft alarm audible alert.
EXAMPLE: A customer describes that the alarm sounds for no apparent reason at some point in the past.
This function can be accessed by selecting:

Diagnosis (All Systems) or Diagnosis (One System).
Then

BCM
Then

THEFT ALM
Then

Work Support
Then

THEFT ALM TRG
See Service Procedure for more detail.
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe
that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/3
SERVICE PROCEDURE
1. Turn the vehicle ON, but do not start the engine.
2. Connect the VI and start C-III plus.
3. To access the theft alarm trigger function, navigate the C-III plus to the screen below through either
Diagnosis (One System) or Diagnosis (All Systems) and then BCM.
4. Select THEFT ALM.
Step 4
Figure 1
5. Select Work Support.
Step 5
Figure 2
2/3
ITB16-009
6. Select THEFT ALM TRG under Test Item.
Step 6
Figure 3

CONSULT-III plus will display a list of all the theft alarm Monitor Items (Figure 4).
 The last trigger to set off the alarm will be displayed as “On”.
 If no triggers were detected, all Monitor Items will show as “Off”
Step 7
Last theft alarm
trigger
Figure 4
7. After a theft alarm trigger has been noted, the history can be cleared by selecting Start.
3/3
ITB16-009


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.