NTB14015C

Classification:
Reference:
WT14-002c
Date:
NTB14-015c
February 29, 2016
2014-2016 ROGUE; TPMS CONFIGURATION
This bulletin has been amended. The Applied Vehicles section has been revised.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
2014-2016 Rogue (T32)
NOTE: This bulletin does not apply to Rogue Select (S35)
SERVICE INFORMATION
When a BCM is replaced for any reason, TPMS (Tire Pressure Monitor System)
configuration must be performed.
TPMS configuration is in addition to any other BCM configurations that may be performed.
If TPMS configuration is not performed, TPMS transmitter ID registration will not
complete.
Follow the SERVICE PROCEDURE in this bulletin to perform TPMS configuration.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/6
SERVICE PROCEDURE
1. Connect the CONSULT-III plus (C-III plus) Vehicle Interface (plus VI) to the vehicle.
2. Turn the ignition ON.
3. Open / start C-III plus.
4. Wait for the plus VI to be recognized.

The serial number will display when the plus VI is recognized.
5. Select Re/programming, Configuration.
Step 4: plus VI
is recognized
Step
5
Figure 1
2/6
NTB14-015c
6. Use arrows (if needed) to view and read all precautions.
7. Check the box confirming the precautions have been read.
8. Select Next.
Step
6
Step
7
Step
8
Figure 2
9. Select Nissan, Vehicle Name, correct Model Year, and then Select.

If the screen in Figure 3 does not display, skip to step 10.
Example
Step
9
Figure 3
3/6
NTB14-015c
10. Make sure VIN or Chassis # matches the vehicle’s VIN.
11. Select Confirm.
Step
10
Step
11
Figure 4
12. Select Confirm.
Step
12
Figure 5
4/6
NTB14-015c
13. Select Air Pressure Monitor.
Step
13
Figure 6
14. Select Manual Configuration.
Step
14
Figure 7
5/6
NTB14-015c
15. Select the DATA PART NO. that matches your vehicle’s configuration – with 2-row or
3-row seating.
 Use the scroll arrows to scroll and find the correct DATA PART NO. / BCM part
number.
16. Select Next.
Example
Step
15
Always ignore
P/Ns 4CL0A
and 4CB0A
40711
40711
4CU0A: With 3-row seating
40711
4BA0A: With 2-row seating
40711
Step
16
Figure 8
Step 15:
Scroll arrows
17. Confirm the correct DATA PART NO. is selected.
18. Select OK. TPMS configuration is complete.
Step
19
40711
Step
17
Step
18
Figure 9
19. Select Home, and then close and disconnect C-III plus from the vehicle.
6/6
NTB14-015c