NTB16033

Classification:
Reference:
HA16-003
Date:
NTB16-033
March 28, 2016
2014-2016 ROGUE; HVAC CONTROLLER
SERVICE INFORMATION
APPLIED VEHICLES:
2014-2016 Rogue (T32)
NOTE: This bulletin does not apply to the Rogue Select (S35)
SERVICE INFORMATION
If the HVAC system control unit is replaced for any reason:

After replacement, make sure to perform Door Motor Starting Position Reset
using CONSULT-III plus (see Figure 1).

This function is found in HVAC > Work support.
Figure 1
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/1