NTB16060

Classification:
Reference:
EC16-002
Date:
NTB16-060
June 21, 2016
2014 SENTRA;
CRANK NO START OR ENGINE STARTS WITH NO THROTTLE
RESPONSE, AND ETC RELATED DTC(S) STORED
APPLIED VEHICLE: 2014 Sentra (B17)
IF YOU CONFIRM:
The vehicle is operated as follows:
1. The ambient temperature is below freezing (below 32°F / 0°C).
2. The engine was started and the vehicle driven a short distance.
3. The vehicle was then parked (engine turned OFF), and then allowed to sit for
at least 10 minutes.
THEN, when restarting the engine:

The engine will crank but not start,
OR

The engine will start, but the engine will not respond to throttle pedal input
AND

One or both of the following Electronic Throttle Control (ETC) related DTCs are
found stored in the ECM:
 P2100 (ETC MOT PWR-B1)
 P2101 (ETC FNCTN/CIRC-B1)
ACTION:
Replace the Intelligent Power Distribution Module (IPDM) with the one listed in the PARTS
INFORMATION section of this bulletin.

Refer to the Electronic Service Manual (ESM), section PCS-Power Control
System, for IPDM removal and installation.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
DESCRIPTION
PART #
QUANTITY
CONTROL UNITIPDM ENGINE ROOM
284B7-xxxxx *
1
* Refer to FAST or your Electronic Parts Catalog.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE SYM DIA FRT
Replace IPDM
(1)
RD21AA
ZE
32
(2)
(1) Reference the Parts Information Table and use the applicable IPDM part number as the
primary failed part.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated flat rate
time.
2/2
NTB16-060