SSM75412
Service Bulletin Details
Public Details for: SSM75412
Smart key inoperative
Models from 2021
| 2021 JAGUAR E-PACE |
| 2021 JAGUAR E-PACE PHEV |
| 2021 JAGUAR F-PACE |
| 2021 JAGUAR F-PACE PHEV |
| 2021 JAGUAR F-TYPE |
| 2021 JAGUAR I-PACE |
| 2021 JAGUAR I-PACE PHEV |
| 2021 JAGUAR XE |
| 2021 JAGUAR XF |
| 2021 JAGUAR XJ |
Models from 2020
| 2020 JAGUAR E-PACE |
| 2020 JAGUAR F-PACE |
| 2020 JAGUAR F-TYPE |
| 2020 JAGUAR I-PACE |
| 2020 JAGUAR I-PACE PHEV |
| 2020 JAGUAR XE |
| 2020 JAGUAR XF |
| 2020 JAGUAR XJ |
| 2020 JAGUAR XK |
Models from 2019
| 2019 JAGUAR E-PACE |
| 2019 JAGUAR F-PACE |
| 2019 JAGUAR F-TYPE |
| 2019 JAGUAR I-PACE |
| 2019 JAGUAR I-PACE PHEV |
| 2019 JAGUAR XE |
| 2019 JAGUAR XF |
| 2019 JAGUAR XJ |
Special Service Message NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the same importance of a Technical Service Bulletin. An SSM is a quick method of communicating "Need To Know" information to the technical service community. SSM's may be issued in advance of a technical bulletin or may be the only communication on a given topic. All information contained in Jaguar technical communications are intended for use by trained, professional technicians with the knowledge, tools, and equipment required to complete the procedure correctly and safely. It informs the Technicians of conditions that may occur on some vehicles, or provides information that could assist in correct vehicle and diagnostic service. SSM 75412 - XCL Smart key inoperative Models : E-Pace / X540 F-Pace / X761 I-Pace / X590 XE / X760 XF / X260 Engineer Shilvock Matthew Name : Last 21 MAY 2021 17:17:42 Modified : Category : Electrical Symptom : 205000 Electrical Accessories Content : I s s u e Smart key inoperative. Insufficient or no power to the smart key. Cause Smart key coin cell upper tension pin lifted from the positive terminal, due to unnecessary force applied when replacing the coin cell. As such, there is not enough pressure on the coin cell with the negative terminal. Action Remove the coin cell and press the upper positive terminal until the negative grid is touched. Upon recovering the position of the terminal, the coin cell shall have firm positive contact with the upper terminal. This should resolve the customer problem. If the problem persists, continue with the usual diagnostic steps to determine the faulty system component. Jaguar Land Rover Limited 2000 - 2020 (Rel. 2691)