NTB21-046
Service Bulletin Details
Public Details for: NTB21-046
Software update for infotainment issues service information when diagnosing an infotainment issue, always confirm that the latest software is installed in the av control unit before starting the diagnosis. The software update in the f
Models from 2021
2021 NISSAN TITAN |
2021 NISSAN TITAN XD |
Models from 2020
2020 NISSAN TITAN |
Classification: AN21-009 Reference: Date: NTB21-046 May 27, 2021 SOFTWARE UPDATE FOR INFOTAINMENT ISSUES APPLIED VEHICLES: 2020-2021 Titan/Titan XD (A61) SERVICE INFORMATION When diagnosing an infotainment issue, always confirm that the latest software is installed in the AV control unit before starting the diagnosis. The software update in the following service procedure is to address the items below: Stability improvements and “bug” fixes. Refer to steps 1 - 4 to confirm that this bulletin applies. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/12 REQUIRED SPECIAL TOOL One special tool, USB drive J-52727-1, has been shipped to each dealer (see Figure 1). Do not use any other USB drive to perform the procedure in this bulletin. Additional USB drives may be purchased from Tech•Mate: nissantechmate.com or 1-800-662-2001. HINT: The update-software must be the only file on the drive. Figure 1 BOSCH CONTACT INFORMATION If additional assistance is required from Bosch, fill out the form below and email it to: [email protected] Bulletin Number Date Dealer Number Mailing Address: Dealer Name Address and Street City State Zip Code Order Placed By (your name) Current audio unit Software version Customer Concern Reason for request 2/12 Cannot download update software NTB21-046 SERVICE PROCEDURE Check Version Information 1. Push the MENU button. Figure 2 2. Select the Info Icon. If the Info icon does not appear as shown in Figure 3, this bulletin does not apply. Figure 3 3. Select System Information to access the vehicle update menu. Figure 4 3/12 NTB21-046 4. Select Version Information. Figure 5 If the Software Version is the version listed in Table A, select the back button and continue to step 5 on the next page. If the Software Version is NOT the version listed in Table A, select the back button, this bulletin does not apply. Back Button Figure 6 Table A MODEL Titan/Titan XD SOFTWARE VERSION 283C33972E 4/12 NTB21-046 Update the AV Control Unit IMPORTANT: Before starting, make sure: 5. ASIST is connected to the internet. ASIST has been synchronized (updated) to the current date. Insert special tool USB drive J-52727-1 into an ASIST Station. If the infotainment software has already been downloaded onto special tool USB drive J-52727-1 from a prior service procedure, skip to step 14 on page 8. HINT: Special tool USB drive J-52727-1 is the only USB drive approved for use with this procedure. The update-software is estimated to take 4 hours to download to the USB drive. The update-software must be the only file on the USB drive. 6. Open ASIST. 7. Select Specialty Tools, and then select Infotainment Software Updates. Specialty Tools Infotainment Software Updates Figure 7 5/12 NTB21-046 8. Select the check box next to infotainment update-software IVI301 (Figure 8). 9. Use the drop-down menu and select the location of the USB drive that was inserted in step 5. Version: Check box D:\ USB drive location IVI301 Infotainment update-software Drop-down menu Figure 8 6/12 NTB21-046 10. Select Download, and then wait for the download to complete. HINT: The update-software is estimated to take 4 hours to download to the USB drive. If, while attempting to download the software to the ASIST Station, you receive the message shown in Figure 9: a. First, attempt to clear space on the ASIST Station hard drive. b. If space on the hard drive cannot be cleared, email Bosch at [email protected] for additional options. Figure 9 11. Select OK. Figure 10 7/12 NTB21-046 12. Once the transfer is complete, safely remove the USB drive from the ASIST Station. a. From the PC toolbar, select the Safely Remove Hardware icon. b. The icon is on the toolbar, or can be found after selecting the arrow. Select the USB drive to be removed, and then remove the USB drive from the ASIST Station. Follow the steps to safely remove the USB drive. If not followed, the USB drive may corrupt the infotainment update-software. If you are not familiar with the process of safe USB drive removal, ask for assistance at your dealer. Safely Remove Hardware icon USB Drive (E:) Arrow on toolbar Figure 11 13. Close all ASIST Infotainment Software Update screens. 14. Set the parking brake. 15. Start the engine, and then wait 60 seconds for the system to load. HINT: The engine needs to idle for the duration of the update to retain battery charge. 8/12 NTB21-046 16. Insert the USB drive with the infotainment update-software into the vehicle’s USB media port (see Figure 12). Do not remove the USB drive during the update to the vehicle until instructed to. HINT: Charging ports are marked in the vehicle with a “lightning bolt” symbol. Do not insert the USB drive into a charging port. If used, the updatesoftware and/or USB drive may become damaged. Only insert the USB drive in a USB media port. USB drive Figure 12 Software Update 17. Wait approximately 10-30 seconds for the screen in Figure 13 to appear. Initializing…. Figure 13 The screen in Figure 14 may briefly appear. Do not remove the USB drive. The audio system will detect the USB and continue the update. xxxxxxxxxxxx Figure 14 9/12 NTB21-046 18. Wait for the update to complete. Follow the on-screen instructions while waiting. HINT: The update may take 15-25 minutes. Software Update The vehicle must remain stopped with the parking brake ON Remaining time ~ 5 min. Figure 15 19. Once the update is complete (Figure 16), remove the USB drive; the system will reboot (restart). HINT: The system will not reboot until the USB drive is removed. Software Update The software Update has finished. The system will now restart… Figure 16 10/12 NTB21-046 Steps 20-27 must be completed. If they are not completed, the update may become corrupted. 20. Allow the reboot to complete (approximately 30 seconds). 21. The Nissan logo will be displayed during the reboot. Turn the ignition OFF. Figure 17 The steps below will fully reboot the infotainment system twice. 22. Open and close the driver door, and then ensure that all doors are closed. 23. Wait 5 minutes. Ensure that all doors remain closed during the five minute wait period. If a door is opened during the five minute wait period, the update may not complete and the AV control unit may become inoperable. HINT: The engine does not need to be running for the next steps. 24. Turn the ignition ON (engine OFF) and wait for the Nissan logo to appear (Figure 17). 25. After the Nissan logo appears, wait about 1 minute. 26. If the Nissan logo does not appear (this might take up to 30 seconds), start over from step 21. The MENU (Home) screen in Figure 18 will be displayed. Turn the ignition OFF. Figure 18 27. Repeat steps 22-26 one more time (for a total of 2 times to complete the update). 11/12 NTB21-046 CLAIMS INFORMATION Submit a Primary Operation (PO) type line claim using the following claims coding: DESCRIPTION OP CODE SYM DIA FRT Perform Software Check RX0AAA ZE 32 0.2 OR Submit a Primary Operation (PO) type line claim using the following claims coding: DESCRIPTION OP CODE SYM DIA FRT Perform Software Check and Update RX0BAA ZE 32 0.3 AMENDMENT HISTORY PUBLISHED DATE REFERENCE May 27, 2021 NTB21-046 DESCRIPTION Original bulletin published 12/12 NTB21-046