T-SB-0034-21

T-SB-0034-21
May 27, 2021
Tire Positioning Before New Vehicle Delivery
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2022
4Runner, Avalon, Avalon
HV, Camry, Camry HV,
Corolla, Corolla Hatchback,
Corolla HV, Highlander,
Highlander HV, Mirai, Prius,
Prius Prime, RAV4, RAV4
HV, RAV4 Prime, Sequoia,
Sienna HV, Supra, Tacoma,
Venza HV
ADDITIONAL INFORMATION
Introduction
During the manufacturing process, tires are mounted on the vehicle as matched sets to help
reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle
delivery, it is important that the tires remain on the vehicle in the same location and in the same
direction of rotation.
Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the
same location on the vehicle.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
© 2021 Toyota Motor Sales, USA
Page 1 of 2
T-SB-0034-21
May 27, 2021
Page 2 of 2
Tire Positioning Before New Vehicle Delivery
Tire Positioning Procedure
1. Mark the tire installation position on the inward facing tire sidewall.
Example: Front Right = FR, Front Left = FL, Rear Right = RR, Rear Left = RL
2. Install the original tires on the NEW or refinished wheels with the marked side facing inward.
3. Balance the tire/wheel assemblies.
4. Place the tire/wheel assemblies on the vehicle in the marked positions.
NOTE
Torque the wheel fasteners to the proper torque value in sequence.
© 2021 Toyota Motor Sales, USA