S7575

Service Bulletin Details

Public Details for: S7575

Tecu software update


- 2021 - 2020 - 2019 - 2018 -

Service Campaign S7575
July, 2021
TECU Software Update
Service Category Service
Section Function Group 432
Technician Skill Level A
Market North America
Applicability
VOLVO
Years
2018 - 2021
Models
VAH, VHD, VN
Introduction
Volvo Trucks has determined that enhanced transmission control strategies are needed for
application specific needs. To deliver these improvements new TECU Software has been released
and made available. The new TECU software will improve engine oscillations during idle, clutch
release strategy, 12th gear lockout functionality, Predictive cruise enhancements, and off-road
shift performance
Production Change Information
This bulletin applies to vehicles built within the specified production changes below.
Brand
Engine
Emission Level
Starting Build Date
Ending Build Date
US17, US21
12-April-2019
29-March-2021
Volvo
D11, D13,
Warranty Information
This repair is covered by an authorized Service Program. Reimbursement is
obtained through the normal claim handling process.
Claim Type (used only when uploading from the Dealer Bus. Sys.)
B
Main Labor Code
Description
4323-22-03-01
Program Transmission ECU (MID 130)
Causal Part
SCC Authorization
Code
Expiration Date
Hours
3092515
S7575
July 31, 2022
0.4
Service Campaign S7575
July, 2021
TECU Software Update
Parts Information
Special Order Information if applicable
Part Numbers
Part Names
Quantity
NA
Required Tools & Equipment
•
Premium Tech Tool (PTT) with latest version
Calibration Information
•
None
Repair Procedure
1.
2.
3.
4.
5.
Secure vehicle for service.
Connect the latest version of Premium Tech Tool (PTT) to the Vehicle.
After identification is complete, navigate to the program tab within PTT.
Select operation 1700-08-03-39 Program Electronic Control Unit.
Select the MID 130 (Transmission Electronic Control Unit) option and reprogram the
control unit.
6. After programming is complete, clear any inactive DTC’s left by the programming
process.
7. Return the vehicle to service.
If you have questions about the programming operation with PTT 2.8 visit
http://www.premiumtechtool.com/


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.