S7577
Service Bulletin Details
Public Details for: S7577
Vecu software update
Models from 2022
2022 VOLVO VAH |
2022 VOLVO VHD |
2022 VOLVO VN |
Models from 2021
2021 VOLVO VAH |
2021 VOLVO VHD |
2021 VOLVO VN |
Models from 2020
2020 VOLVO VAH |
2020 VOLVO VHD |
2020 VOLVO VN |
July, 2021 Service Campaign S7577 Vehicle Electronic Control Unit (VECU) Software Update Service Category Service Department Section Function Group 364 Technician Skill Level A Market North America Applicability VOLVO Model Years 2021 - 2022 Models VAH, VHD, VN, VNE Introduction Volvo Trucks has determined that enhanced vehicle control strategies are needed for application specific needs. To deliver these improvements new VECU Software has been released and made available. The new VECU software will improve: PTO functionality, update certain parameters, enhance cruise control operation, and advanced DTC strategies. Production Change Information This bulletin applies to vehicles built within the specified production changes below. Brand Engine Emission Level Starting Build Date Ending Build Date EM-USA17, D11/13 Volvo EM-USA21, 03-February-2020 19-March-2021 CU12/15 EM-ZE Warranty Information This repair is covered by an authorized Service Program. Reimbursement is obtained through the normal claim handling process. Claim Type (used only when uploading from the Dealer Bus. Sys.) B Main Labor Code Description 3640-22-03-02 Program Vehicle Electronic Control Unit Causal Part SCC Authorization Code Expiration Date Hours 3092072 S7577 July 31, 2022 0.5 Service Campaign S7577 July, 2021 Vehicle Electronic Control Unit (VECU) Software Update Parts Information Special Order Information if applicable, Part Numbers Part Names Quantity *NA Required Tools & Equipment Premium Tech Tool (PTT) with latest version Calibration Information None Repair Procedure 1. 2. 3. 4. 5. 6. Secure vehicle for service. Connect the latest version of Premium Tech Tool (PTT) to the Vehicle. After identification is complete, navigate to the program tab within PTT. Select operation 1700-08-03-39 Program Electronic Control Unit. Select the Vehicle Electronic Control Unit option and reprogram the control unit. After programming is complete, clear any inactive DTC’s left by the programming process. 7. Return the vehicle to service. If you have questions about the programming operation with PTT 2.8 visit http://www.premiumtechtool.com/