21-BE-009H

GROUP
NUMBER
Body Electrical
Technical Service Bulletin
SUBJECT:
DATE
21-BE-009H
MODEL(S)
July, 2021
Santa Fe (TMa)
SANTA FE (TMA) CRASH PAD CENTER SPEAKER REPLACEMENT
PROCEDURE
Description: The front center speaker may produce a scratchy or distorted sound during operation.
This bulletin describes the procedure to replace the crash pad center speaker for certain 20 and
21MY TMa Santa Fe.
Applicable Vehicles: Certain 2020-2021MY Santa Fe (TMa).
Parts Information:
PART NAME
Speaker Assy – Front Center
PART#
96350-S1200
QTY
1
Warranty Information:
MODEL
OP CODE
OPERATION
Santa Fe
Crash Pad Center
10DA22R0
(TMa)
Speaker Replacement
OP TIME
CAUSAL
PART
NATURE
CODE
CAUSE
CODE
0.2 M/H
96350-S1200
M43
ZZ3
Note 1: Submit claim on Campaign Claim Entry Screen
Note 2: If part that is not covered by this campaign is found in need of replacement while performing this TSB and the
affected part is still under warranty, submit a separate claim using the same Repair Order. If the affected part is out of
warranty, submit a Prior Approval Request for goodwill consideration prior to performing the work.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
SANTA FE (TMA) CRASH PAD CENTER SPEAKER REPLACEMENT
Service Procedure:
1.
Turn ignition ‘OFF’.
2.
Using a plastic pry tool, begin the removal at
the indicated position where a slot is located
for inserting a removal tool.
!
CAUTION
Use plastic removal tools and
clean shop towels to avoid
damage to the crash pad
surface.
TSB #: 21-BE-009H
Page 2 of 4
SUBJECT:
SUBJECT:
3.
SANTA FE (TMA) CRASH PAD CENTER SPEAKER REPLACEMENT
Carefully work the plastic pry tool around the
speaker grill until removed.
NOTICE
Use a clean shop towel or
microfiber cloth to protect the
crash pad while prying.
4.
Remove the two (2) screws that secure the
speaker.
(A, 8mm) and (B, 8mm).
Tightening Torque:
17.7 - 24.5 Nm (1.8 - 2.5kgf.m, 13.0 - 18.1lbft)
5.
B
A
Disconnect the main wiring harness
connector (C) and remove speaker.
C
TSB #: 21-BE-009H
Page 3 of 4
SUBJECT:
SUBJECT:
SANTA FE (TMA) CRASH PAD CENTER SPEAKER REPLACEMENT
6.
Connect new speaker and confirm speaker
operates as designed. Once confirmed,
reassemble speaker and grill into crash pad.
7.
The service procedure is now complete.
TSB #: 21-BE-009H
Page 4 of 4
SUBJECT: