2063029/2

Service Bulletin Details

Public Details for: 2063029/2

Epb fault warning within the dip - dtcs stored in address 03 - C100C01 and C1246f9. Customer statement / workshop findings: epb fault warning within the dip with one or both dtcs as listed below: C100C01: electro-mechanical parking br


- 2022 - 2021 - 2020 - 2019 - 2018 -

Technical product information
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
EPB fault warning within the DIP - DTC’s stored in address 03 - C100C01 and C1246F9
Bentley: worldwide (2WBE)
Bentley
2063029/2
EH
Approval
Event memory entries
Diagnostic address
Event memory entry
0003 - Brake Electronics
0003 - Brake Electronics
0003 - Brake Electronics
0003 - Brake Electronics
C100C01: Electro-mechanical parking brake button electrical error
C100C01: Electro-mechanical parking brake button electrical error
C1246F9: Electromechanical parking brake Button interruption
C1246F9: Electromechanical parking brake Button interruption
Fault type Fault status
Intermittent
static
Intermittent
static
New customer code
Object of complaint
Complaint type
running gear -> brakes, brake control -> electronic parking brake (EPB) functionality -> without function / defect
Vehicle data
New Continental GT,GTC and New Flying Spur
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
3S3*
3S3*
3S3*
3S3*
3S3*
3S4*
3S4*
3S4*
3S4*
ZG2*
ZG2*
ZG2*
2018
2019
2020
2021
2022
2019
2020
2021
2022
2020
2021
2022
E
E
E
E
E
E
E
E
E
E
E
E
Documents
Document name
master.xml
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Position
Technical product information
EPB fault warning within the DIP - DTC’s stored in address 03 - C100C01 and C1246F9
Transaction No.: 2063029/2
Customer statement / workshop findings
EPB fault warning within the DIP with one or both DTC’s as listed below:
C100C01: Electro-mechanical parking brake button electrical error
And/or
C1246F9: Electromechanical parking brake Button interruption.
Technical background
Refer to the Measure section of this TPI
Production change
Not applicable
Measure
1. Does the EPB switch function correctly
Comments
2. Does the LED activate on the switch and within the DIP?
Comments
3. Can the DTC’s be cleared?
Comments
4. Referring to the applicable Rep.Gr - Remove the switch, check and confirm the connectors are fully clipped into place.
5. If no issues with the connectors are found - Inspect the harness to the switch for any pinched or trapped wiring/incorrect routing
Comments
4. Raise a DISS or respond via a previously opened query and feedback on the above checks, ensuring a current ODIS log is att ached
The EPB switch should only be replaced if all wiring checks have been completed with no issues found and permission has
been given via the open DISS query


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.