TSB 21-009

Installation of cabinet support brackets-Euro Bunk option
Publication Date:
Bulletin Type:
TSB
Bulletin #(s):
21-009
Make(s):
Jayco
Job Code(s):
9801568
Model(s):
Pinnacle
Flat Rate(s):
2 Hours
Model Year(s):
Incident:
Affected Units:
October 2021
2018
Euro Bunk (option) – The full width cabinet mounted below the Euro
Bunk does not have proper supports.
2018 Pinnacle 37RSTS (RS) Floorplan with (Optional) Euro Bunk.
Parts Kit Contents:
- 2ea. Part A Steel Support Brackets (Part# 2027603)
- 2ea. Part B Flat Steel Support Brackets (Part# 2027604)
Parts Kit: 21-009JT
Purchase locally:
- 2ea. ¼”-20 x 1 ¾” Grade 5 Hex Head Cap Screw
- 2ea. ¼”-20 x 2” Grade 5 Hex Head Cap Screw
- 8ea. ¼” Dia. SAE Flat Washers
- 4ea. ¼-20 UNC Nylon insert lock nuts
- 8ea. Screw RW Quad 8.00 X 1.12 DT
Misc. Tools & Supplies:
-
Compact Drill
Socket Set
Drill Bits
Screw Bits
Tape Measure
Parts Return Information: N/A
TSB # 21-009 Euro Bunk Cabinet Repair
October 2021
Page 1 of 3
INSTRUCTIONS - EURO BUNK CABINET SUPPORT INSTALLATION
1. Inspect the unit to confirm that there is a full
width cabinet installed under the Euro Bunk as
shown in Fig 1.
FIG 1
2. Lower the Euro Bed to approximately 4’ from
the floor. This will be a good working height.
3. Remove the mattress to reveal bed slats and
rear panel mounting screws shown in Fig. 2.
4. Measure along the back of the bunk, 14” from the
left side for the securement location of the first steel
support bracket Fig 2.
FIG 2
5. Remove the existing fastener securing the back panel
Fig 2. Use this hole to secure the steel Bracket (Part
A) with the ¼ - 20 Bolt and nut.
6. Bracket support fits between bed frame and back
panel as shown in Fig 3.
FIG 3
7.
Secure the bottom of Part A with two wood screws
as shown in Fig 3.
8.
Repeat steps 4 – 6 for the right side, measuring the
same 14” from the right side to locate the fastener
location.
TSB # 21-009 Euro Bunk Cabinet Repair
October 2021
Page 2 of 3
FIG 5
FIG 4
9. Review bracket print to the
right and install Bracket
support Part B at the left side of
the bunk shown in figure 4.
10. Measure from the front of the
bunk 2 inches for the
Installation of the ¼ -20 bolt
shown in fig 5 and the two
wood screws which are shown
in Fig 4.
11. Repeat steps for the right side
12. Installation is now complete. Check operation of the Euro Bunk.
Jayco’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined
by Jayco in our sole discretion. Jayco reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to
make parts and/or design changes as appropriate without notice to anyone. Jayco designs and/or materials changes are done without obligation to
incorporate such changes in previously manufactured product. Jayco makes every reasonable effort to ensure field remedies will not adversely affect
performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or
parts beyond the standard warranty period. The RV owner’s obligation to notify Jayco, or one of its independent, authorized dealers, of a claimed defect
does not modify any obligation placed on the RV owner to contact Jayco directly when attempting to pursue remedies under state or federal law. Jan. 2019.
903 South Main Street • P.O. Box 460 • Middlebury, IN 46540
TSB # 21-009 Euro Bunk Cabinet Repair
October 2021
Page 3 of 3