SSM 50174

Service Bulletin Details

Public Details for: SSM 50174

Some 2017-2019 f-super duty vehicles may experience an intermittent no crank condition. Diagnostic trouble code (dtc) P06E9 may also be set in the powertrain control module (pcm). This may be due to corrosion being present on the run start


- 2019 - 2018 - 2017 -

SSM 50174 - 2017-2019 F-Super Duty - Intermittent No Crank With Or
Without DTC P06E9
Some 2017-2019 F-Super Duty vehicles may experience an intermittent no crank condition.
Diagnostic trouble code (DTC) P06E9 may also be set in the powertrain control module (PCM). This
may be due to corrosion being present on the run start relay in the battery junction box (BJB).
Inspect the run start relay for signs of corrosion, including along the terminal edges, prior to
performing Workshop Manual (WSM) diagnostics. If corrosion is found, replace the run start relay
with new service part, MU5Z-14N089-A. If no corrosion is found on the run start relay, refer to WSM,
Section 303-06 for normal diagnostics.
APPLICABLE VEHICLES
2017 - 2019 TRUCK: FE P558N SUPER DUTY


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.