TT 011903
Service Bulletin Details
Public Details for: TT 011903
Diagnostic assistance when vehicle readiness will not set.
- 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -
Models from 2018
2018 VOLKSWAGEN BEETLE |
2018 VOLKSWAGEN BEETLE CONVERTIBLE |
2018 VOLKSWAGEN GOLF |
2018 VOLKSWAGEN JETTA |
2018 VOLKSWAGEN PASSAT |
Models from 2017
2017 VOLKSWAGEN BEETLE |
2017 VOLKSWAGEN BEETLE CONVERTIBLE |
2017 VOLKSWAGEN GOLF |
2017 VOLKSWAGEN JETTA |
2017 VOLKSWAGEN PASSAT |
Models from 2016
2016 VOLKSWAGEN BEETLE |
2016 VOLKSWAGEN BEETLE CONVERTIBLE |
2016 VOLKSWAGEN GOLF |
2016 VOLKSWAGEN JETTA |
2016 VOLKSWAGEN PASSAT |
Models from 2015
2015 VOLKSWAGEN BEETLE |
2015 VOLKSWAGEN BEETLE CONVERTIBLE |
2015 VOLKSWAGEN GOLF |
2015 VOLKSWAGEN JETTA |
2015 VOLKSWAGEN PASSAT |
Models from 2014
2014 VOLKSWAGEN BEETLE |
2014 VOLKSWAGEN BEETLE CONVERTIBLE |
2014 VOLKSWAGEN GOLF |
2014 VOLKSWAGEN JETTA |
2014 VOLKSWAGEN PASSAT |
Models from 2013
2013 VOLKSWAGEN BEETLE |
2013 VOLKSWAGEN BEETLE CONVERTIBLE |
2013 VOLKSWAGEN GOLF |
2013 VOLKSWAGEN JETTA |
2013 VOLKSWAGEN PASSAT |
Technical Tip 01-19-03TT - Readiness Status Will Not Set Transaction No: 2054180/2 Release date: 11/19/2021 Condition ATTENTION: THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN. TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING. Applicable Vehicles Model(s) Jetta, Golf, Beetle, Beetle Convertible, Passat Year Eng. Code Trans. Code VIN Range From VIN Range To 2013-2018 CCTA, CBFA, CBPA, CPRA, CPKA, CPPA, CPLA, CXBA, CXBB, CXCA, CXCB, DDSA, DDSB All All All Revision Table Instance Number Published Date Version Number Reason For Update 2054180/3 11/19/21 01-19-03TT To increase the engine speed RPM during the Fuel Cut-Off Monitoring Test. 2054180/1 3/1/19 TT 01-19-03 Original publication. Technical Background Readiness status will not set. Service Fuel Cut-Off Monitoring Test: Road test and accelerate vehicle to an engine speed of 5,000 RPM. Lift off the throttle and allow the vehicle to decelerate without braking input until the engine speed is around 1,200 RPM. Repeat test up to 5 times and continue to Catalyst Monitoring. Catalyst Monitoring Test: Road test and accelerate vehicle smoothly to 50-55 mph. Set the cruise control and continue driving at the designated speed for 5 minutes or more to change Catalyst readiness. 1 Technical Tip 01-19-03TT - Readiness Status Will Not Set Transaction No: 2054180/2 Release date: 11/19/2021 Additional Information © 2021 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 2