A4822152065872_1
Service Bulletin Details
Public Details for: A4822152065872_1
This bulletin provides instructions for a software update for a dtc in the power steering control unit, which may be discovered during inspection work.
- 2022 - 2021 - 2020 - 2019 - 2018 -
Models from 2022
2022 AUDI A3 |
2022 AUDI Q3 |
2022 AUDI RS3 |
2022 AUDI S3 |
2022 AUDI TT |
2022 AUDI TT RS |
2022 AUDI TTS |
Models from 2020
2020 AUDI A3 |
2020 AUDI Q3 |
2020 AUDI RS3 |
2020 AUDI S3 |
2020 AUDI TT |
2020 AUDI TT RS |
2020 AUDI TTS |
Models from 2019
2019 AUDI A3 |
2019 AUDI Q3 |
2019 AUDI RS3 |
2019 AUDI S3 |
2019 AUDI TT |
2019 AUDI TT RS |
2019 AUDI TTS |
Models from 2018
2018 AUDI A3 |
2018 AUDI Q3 |
2018 AUDI RS3 |
2018 AUDI S3 |
2018 AUDI TT |
2018 AUDI TT RS |
2018 AUDI TTS |
Technical Service Bulletin 48 DTC C10AC07: Steering mechanical malfunction logged in the J500 48 22 15 2065872/1 January 28, 2022. Model(s) Year VIN Range Vehicle-Specific Equipment A3, A3 Cabriolet, S3, RS 3, Q3, TT, TTS, and TTRS 2018 – 2022 All Not Applicable Condition Customer states: There are no customer complaints. Workshop findings: During an inspection work, the following DTC is found in the power steering control unit J500 (diagnostic address 0044): • C10AC07: Steering mechanical malfunction (active/static). • Symptom codes: 24320 or 24321 or 24322 or 24323 or 24324 or 24325 Technical Background Software issue. Production Solution Improved software. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the J500 (0044) using the SVM action code as listed in the table below, if necessary: © 2022 Audi of America, Inc. Page 1 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Model A3 Old Software Part Number Old Software Version New Software Part Number New Software Version SVM Code Input (or higher) 3Q0909144L 5081 3Q0909144L 5082 5Q0909144AA 1081 5Q0909144AA 1082 TT 3Q0909144L 5081 3Q0909144L 5082 Q3 5Q0909144AA 1081 5Q0909144AA 1082 5QF909144A 5581 5QF909144A 5582 44A034 Warranty Claim Type: • 110 Up to 48 Months/50,000 Miles • G10 for CPO – Verify Owner • If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 4835 Damage Code: 0040 Diagnostic Time: GFF 0150 0000 Time stated on the diagnostic protocol (Max 50 TU) Road test prior to the service procedure No allowance 0 TU Road test after the service procedure No allowance 0 TU Claim Comment: As per TSB 2065872 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools © 2022 Audi of America, Inc. Page 2 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Additional Information The following Technical Service Bulletin(s) will be necessary to complete this procedure: • TSB 2011732: 00 Software Version Management (SVM), operating instructions. All part and service references provided in this TSB (2065872) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2022 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. © 2022 Audi of America, Inc. Page 3 of 3 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.