VOS-22-03
Service Bulletin Details
Public Details for: VOS-22-03
This document outlines updates to the odis diagnostic software. Updates include corrected diagnostic test plans for the stated vehicles.
- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2022
| 2022 VOLKSWAGEN TAOS |
Models from 2020
| 2020 VOLKSWAGEN ATLAS |
| 2020 VOLKSWAGEN JETTA |
Models from 2019
| 2019 VOLKSWAGEN ATLAS |
| 2019 VOLKSWAGEN JETTA |
Models from 2018
| 2018 VOLKSWAGEN ATLAS |
| 2018 VOLKSWAGEN JETTA |
Models from 2017
| 2017 VOLKSWAGEN JETTA |
| 2017 VOLKSWAGEN TOUAREG |
Models from 2016
| 2016 VOLKSWAGEN JETTA |
| 2016 VOLKSWAGEN TOUAREG |
Models from 2015
| 2015 VOLKSWAGEN JETTA |
| 2015 VOLKSWAGEN TOUAREG |
Models from 2010
| 2010 VOLKSWAGEN GOLF |
| 2010 VOLKSWAGEN TOUAREG |
Service Information Offboard Diagnostic Information System Service (ODIS Service) Number: VOS-22-03 Subject: Software Version Update, Enhancements and Fixes Date: Jan. 19, 2022 Supersedes VOS-21-53 due to new diagnostic content The following ODIS Service software versions are available for download. Current ODIS Service Software Versions Application: V9.0.1 Diagnostic Content: V2.44.0 Key Fixes/Enhancements for Diagnostic Content: V2.44.0: 1. BU - Jetta 2018 – 2021 B201000: no basic setting and B135454: Seat height adjustment motor no basic setting J810_X_1_0614_11_Grundeinstellung_00000 malfunctions. Basic setting for the seat height adjustment not performed. 2. E2/E3 - ID.4 2021 Passenger Occupant Detection System Control Module -J706- calibration J706_X_1_0819_11_Grundeinstellung_00011 malfunction. During the control module scan, it was determined that this vehicle is not equipped with the following component: Passenger Occupant Detection System Control Module -J706-. 3. CA/CM Atlas 2018 – 2021 B116229: Selector lever park position lock switch Range/Performance F319_X_1_0913_11_BCM_UDS_00011 malfunctions. Test step Read measuring value: Selector Lever Park Position Lock Switch - F319 malfunctions. Do not operate the following component: Selector lever. Specified value: Not engaged and not locked. 4. 5K - Golf 2010 - 2014 P0474: Exhaust Pressure Sensor "A" Circuit Intermittent/Erratic is active/static in the ECM, but no test is created in Test Plans for the fault code. (cont.) Page 1 of 2 © 2022 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without not ice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Service Information 5. 7P - Touareg 2010 – 2017, CGRA 3.6 L FSI / 206kW VAG01856: Right Front Seat Temperature Sensor G345_7P_72_____1_1109_11_00011 incorrect component test for VIN. VIN is equipped with PR code 4A3 heated seats and 4D0 non-ventilated seat, equipped with G60 front passenger heated seat temp sensor and not G345 Temperature sender for front right seat. 6. CL - Taos 2022 P064F00: Unauthorized Software/Calibration Detected SYS_X_1_0317_11_X_X_MSG_XX_FSB_Motorsteuergeraet_00000 still active/static after ECM replacement. Test ends with “Replace the following component: Engine/Motor Control Module - J623”. ECM has already been replaced. 7. 16 - Jetta 2011 – 2018, CJAA 2.0 L TDI CR / 103 kW P2271: O2 Sensor Signal Stuck Rich; Bank 1 Sensor 2 G130_5K_23CJAA_1_0609_66_00011 incorrect specified voltage at T6ao between pins 2 and 6. Voltage measurement has been eliminated from test. 8. CA/CM Atlas 2018 – 2021 P030000: Random/Multiple Cylinder Misfire Detected and P030400: Cyl.4 Misfire Detected SYS_X_1_0616_11_X_X_VAU_OT_FSB_Aussetzer_00000 malfunction. Test step: Performing basic setting - Note the following boundary conditions: Malfunction Reason for cancellation: Malfunction 9. General translation errors. Page 2 of 2 © 2022 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without not ice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.