A9022442065812_1

Technical Service Bulletin
90 Night vision assist message appears in the instrument cluster, DTC U110100 is stored in the night
vision module
90 22 44
2065812/1 February 3, 2022.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A6, A7, A8,
Q7, and Q8
2019 – 2020
All
With Night Vision assistant
S6 and S7
2020
All
With Night Vision assistant
SQ7, SQ8,
and RS Q8
2020-2021
All
With Night Vision assistant
Condition
Customer states:
• When using the night vision system, the message “Night vision assist: fault. Please contact service” is
displayed in the instrument cluster.
• The night vision system does not work.
Workshop findings:
The following DTC is stored in the control module for the night vision system, J853 (address word 0084):
• DTC U110100 (Component protection active).
Technical Background
A diagnostic feature is too sensitive.
Production Solution
Updated software is being used in production.
Service
SVM Update Instructions
Page 1 of 3
© 2022 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without
notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Always use DoIP when flashing a control module via ODIS in supported vehicles.
To Activate DoIP, select Administration>>General>>GFF Process>>DoIP
communication>>Only allow DoIP communication
This setting will automatically reset when the diagnostic session is ended.
You can tell if DoIP is active by observing a red LED on the VAS 6154(A)
• Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
• Update the Diagnostic interface for databus -J533- (diag. addr. 0019) using the SVM action code as listed in
the table below, if necessary:
Model
Old Software Part Old Software
Number
Version
8W5907468C
A4, A5, A6, A7, A8,
Q5, Q7, and Q8
*
New Software Part New Software
Version
Number
(or higher)
(or higher)
8W5907468C
3299
8W6907468C
8W6907468C
8W8907468C
8W8907468C
8W7907468C
8W7907468C
8WD907468D
*
8WD907468D
0325
8W5907468C
*
8W5907468C
1309
8W6907468D
8W6907468D
8W2907468D
8W2907468D
8W8907468D
8W8907468D
8W7907468C
8W7907468C
8W6907468E
*
8W6907468E
8W2907468E
8W2907468E
4M4907468E
4M4907468E
8W8907468E
8W8907468E
8W5907468E
8W5907468E
8W7907468E
8W7907468E
4M1907468E
4M1907468E
SVM Code
Input
19A020
3119
Warranty
Page 2 of 3
© 2022 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without
notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
9035
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max
80 TU)
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
No allowance
0 TU
Claim Comment:
As per TSB 2065812/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2039206: 00 How to watch TSB videos.
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2065812) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2022 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 3 of 3
© 2022 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without
notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.