PIP5742A
Service Bulletin Details
Public Details for: PIP5742A
This preliminary information communicates to the dealer technicians that a belt chirp or rubbing noise may be caused by the harmonic balancer out ring moving backward on the pulley and contacting the front cover.
Models from 2020
2020 CHEVROLET SILVERADO 4500HD |
2020 CHEVROLET SILVERADO 5500HD |
2020 CHEVROLET SILVERADO 6500HD |
2020 GMC SIERRA DENALI |
Models from 2019
2019 CHEVROLET SILVERADO 4500HD |
2019 CHEVROLET SILVERADO 5500HD |
2019 CHEVROLET SILVERADO 6500HD |
2019 GMC SIERRA DENALI |
Bulletin No.: PIP5742A Published date: 02/2/2022 Preliminary Information PIP5742A Belt Chirp Noise and-or Harmonic Balancer Rubbing on Timing Cover Models Brand: Model: Model Years: VIN: from to Engine: Transmissions: Chevrolet Silverado HD 2019 - 2020 All All 6.6 L5P All GMC Sierra HD 2019 - 2020 All All 6.6 L5P All Chevrolet Silverado 4500HD, 5500HD, 6500HD 2019 - 2020 All All 6.6 L5D All Involved Region or Country: Condition: Cause: North America A customer concern may be of a belt chirp noise and/or metal to metal noise. The outer ring of the harmonic balancer may slide backward and cause a misalignment of the belt. The outer ring may slide back far enough to contact the timing cover and oil pan(s). Correction: Inspect the harmonic balancer, timing cover and oil pans. Replace as needed. See images below for examples. Harmonic balancer damage due to contact. Separation of the harmonic balancer's inner and outer rings. The new damper has a hub that is longer than the inertia ring. Movement can be identi ed by inspecting the hub directly at the elastomer. Look for a witness mark of where the elastomer was originally positioned. Damage to the timing cover and upper oil pan. Damage to the timing cover and upper oil pan. Service Procedure: Refer to service information for proper procedures. Warranty Information For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation: 4063290 Description: Labor Time: Crankshaft Pulley Replacement Use Published Labor Times 4063610 Engine Front Cover Replacement Use Published Labor Times 4065910 Lower Oil Pan Replacement Use Published Labor Times 4065890 Upper Oil Pan Replacement Use Published Labor Times Version History Version Modi ed 2 06/23/2020 - Created on. 04/22/2021 - Updated to replace Labor Op 4063250 with 4063290. © 2022 General Motors. All Rights Reserved.