LI5164E

SAV.1E.2012MA
LI5164E
INFORMATION LETTER
REFERENCE:
Nova Bus Manuals
SECTION:
14: Heating and Ventilation
RS NO:
MQR 7621-2265
APPLICATION DEADLINE: N/A
EFFECTIVE IN PROD.: N/A
SUBJECT:
Bracket installation to add a strain relief on the MCC display screen wires.
JUSTIFICATION:
MCC Driver's Display Electrical Terminal Failure.
LEVEL
1
DIRECT CHARGES
DESCRIPTION
New Bracket installation on upper driver panel
2
TIME
LABOUR
MATERIAL
Client
Client
0.5 hr
–
–
–
–
MATERIAL
QTY
PART NO
REV.
DESCRIPTION
REPLACES PART N°
1
N81344
–
CABLE TIE-EC21 VERT 50LBS 8"L
–
4
N32320
–
SCREW M3 X 20 MACH PAN CR SS
–
2
N25917
–
NUT LOCKNYL M3 ZC DIN 985
–
2
N80260
–
WASHER M3 SS BLK OX DIN125
–
1
N104152
–
BRACKET - MCC DISPLAY WIRES
–
–
–
–
–
–
–
–
–
LEVEL 1
LEVEL 2
–
SHOP SUPPLY
–
Materials will be available within 102 days once your order has been placed.
To order, please contact [email protected]
Or by phone for CANADA 1-800-771-6682, for USA 1-877-999-8808
Specify document number, quantity of parts required and shipping address.
DISPOSAL OF PARTS
REMOVED PARTS ARE:
DISCARDED *
RETAINED
Yes
–
* Dispose of the unused parts and the defective parts in
accordance with local environmental standards in effect.
REVISION HISTORY
REV.
DATE
CHANGE DESCRIPTION
WRITTEN BY
NR
2022MR24
Initial release
Rajendra N M
APPROVED BY:
Jean-Nicolas Fournier
Digitally signed by Jean-Nicolas Fournier
DN: cn=Jean-Nicolas Fournier, o=Nova Bus, [email protected], c=CA
Date: 2022.03.24 08:23:32 -04'00'
PAGE 1 OF 6
INFORMATION LETTER
CLIENT
ORDER
Academy Busline - New Jersey
ROAD NUMBER
SAV.1E.2012MA
LI5164E
VIN (2NVY/4RKY...)
QTY
FROM
TO
FROM
TO
LE57
–
–
L82J9N3753381
L82J3N3753411
25
Academy Busline - New Jersey
LC95
–
–
L82J2L9777559
L82J9L9777560
2
Academy Busline - New Jersey
LD60
–
–
L82JXM3752934
L82JXM3752948
15
PAGE 2 OF 6
INFORMATION LETTER
SAV.1E.2012MA
LI5164E
WARNING
Follow your internal safety procedures.
PROCEDURE
1.1.
Park the vehicle on an even surface with transmission in neutral (N).
1.2.
Turn the ignition switch to OFF position and engage the parking brake.
1.3.
Set the master control switch in the STOP position (see figure 1).
Master control switch in
STOP position
Figure 1 - Master Control Switch in STOP Position
1.4.
Set the battery disconnect switch in the battery compartment to the OFF position (see figure 2).
Battery disconnect
switch in OFF
position
Main power light
turned OFF
Figure 2 - View of Battery Disconnect Switch
PAGE 3 OF 6
INFORMATION LETTER
1.5.
SAV.1E.2012MA
LI5164E
Open the upper driver panel and locate the MCC display screen (see figures 3 & 4).
Figure 3 - MCC Screen Location
Figure 4 - MCC Screen Location.
PAGE 4 OF 6
INFORMATION LETTER
1.6.
SAV.1E.2012MA
LI5164E
Remove the old M3 screws and replace them with new M3 screws P/N N32320 (see figure 5).
NOTE
Do not over tighten the screws to avoid cracking the plastic retaining the screen.
Figure 5 - MCC Screen Location.
1.7.
Install the bracket P/N N104152 using the M3 washer P/N N80260 and the M3 Locknyl nut P/N N25917
(see figure 6).
PAGE 5 OF 6
INFORMATION LETTER
SAV.1E.2012MA
LI5164E
1) N80260 (M3 washer)
2) N25917 (Locknyl nut)
3) N104152 (Bracket)
4) N81344 (Cable tie)
Figure 6 - Bracket Installation
1.8.
Install the serrated cable tie P/N N81344 using the cable tie,secure the wires (see figure 6).
1.9.
Cut the excess cable tie and close the driver upper panel.
1.10.
Return the bus to service.
PAGE 6 OF 6