No. 142-21

Service
Technical Information
142/21 ENU
9430
9
Complaint: Insects in the Tail Light - Replace Tail Lights if Necessary and Rework Them
(142/21)
Change overview
Version
Date
Note
1.0
01/25/2022
First publication
2.0
03/16/2022
Information on warranty processing added
Model Line:
Macan (95B)
Model Year:
As of 2019
Concerns:
Side tail lights, left and right
Information:
Due to the concept-related internal fogging behavior, insects can enter the inner tail light via corresponding openings in the body and tail light.
Insect ingress for tail light
Action required: In the event of a customer complaint, replace the affected tail light and seal the opening for the cable
bushing with a plastic foam strip.
AfterSales
Mar 16, 2022
Page 1 of 4
9
Service
Technical Information
ENU 142/21
9430
Required parts and materials
Parts Info:
Part No.
Designation
– Location
Number
95B898922
 Plastic foam strip
– Tail light, left and right
2 ea.
Information
For details of the part number of the required tail light depending on vehicle equipment, see Porsche Electronic Parts Catalogue (PET).
Materials:
Part No.
Designation
Number
...
Tie-wrap (commercially available)
Length: approx. 60 mm/ 2.36 in, width: 2.0 - 2.5
mm/ 0.08— 0.1 in
2 ea.
Replacing and reworking tail lights
Information
If insects get into the tail light, the affected tail light must be replaced.
If insects are not getting into both tail lights, only retrofit the plastic foam strip on the tail light that is not
affected.
Work Procedure: 1
Mar 16, 2022
Page 2 of 4
Remove tail lights.  Workshop Manual '943119 Removing and installing tail light'
AfterSales
Service
Technical Information
142/21 ENU
9430
9
Retrofitting plastic foam strip
2
Before installing the tail light, affix a strip of foam to the opening on the cable bushing  Retrofitting
plastic foam strip -1- as shown in the figure  Retrofitting plastic foam strip.
3
Route electric line for the tail light as shown in the figure  Retrofitting plastic foam strip and secure
it at the edge with a tie-wrap  Retrofitting plastic foam strip -2-.
Cut off the extra length at the end of the tie-wrap using side cutters.
4
Install tail lights  Workshop Manual '943119 Removing and installing rear light'
Invoicing
Information
The specified labor operation includes all work and scenarios described in this Technical Information for
both tail lights. The labor operation therefore applies irrespective of whether the tail lights were replaced
and reworked or merely reworked.
For documentation and invoicing in the case of a warranty claim, state the specified work item and PQIS
code in the warranty claim.
APOS
Labor operation
94315000
Reworking the tail light
I No.
AfterSales
Mar 16, 2022
Page 3 of 4
9
Service
Technical Information
ENU 142/21
9430
PQIS coding:
Location (FES5)
94310
Tail light
Damage type (SA4)
1041
Foreign body
References:
 Workshop Manual '943119 Removing and installing rear light'
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2022 Porsche Cars North America, Inc.
Mar 16, 2022
Page 4 of 4
AfterSales