16004

Service Bulletin
16-004
January 23, 2016
03050 Version 1
Product Update: 2015 Odyssey Vehicle Certification Label
AFFECTED VEHICLES
Year
Model
2015
Odyssey
Trim
ALL
VIN Range
Check the iN VIN status for eligibility.
BACKGROUND
The trailer hitch weight was not properly calculated into the gross axle weight rating (GAWR) on the vehicle certification
label. This can create a situation where the vehicle exceeds the indicated gross axle weight rating.
Additionally, the Owner’s Guide incorrectly states the towing capacity of the vehicle is 1,500 lbs. The Owner’s Guide
should show a table listing the towing capacity based on the number of passengers in the vehicle.
CUSTOMER NOTIFICATION
Owners of affected vehicles will be sent a notification of this campaign.
Do an iN VIN status inquiry to make sure the vehicle is shown as eligible.
Some vehicles affected by this campaign may be in your new or used vehicle inventory. Repair these vehicles before
they are sold.
CORRECTIVE ACTION
Apply the vehicle certification correction sticker and replace the Owner’s CD and Owner’s Guide.
PARTS INFORMATION
Part Name
2015 Odyssey Owner’s Manual Kit (includes the Owner’s CD, Owner’s Guide,
and sticker)
Part Number
Quantity
00X3A-TK8-A41
1
WARRANTY CLAIM INFORMATION
Operation
Number
Description
Flat Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed Part Number
4350A2
Apply the certification
label correction sticker
and replace the Owner’s
CD and Owner’s Guide.
0.2 hr
6MA00
JW600
16-004A
42762-TK8-A01
Skill Level:
Repair Technician
CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools,
equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you
should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information
applies, contact an authorized Honda automobile dealer.
© 2016 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 2
REPAIR PROCEDURE
1. Using rubbing alcohol and a clean shop towel, clean the certification label on the driver’s doorjamb. Allow the label
to dry.
2. Peel the backing off the correction sticker and apply it to the certification label in the exact position shown. Press the
correction sticker to make sure it’s properly affixed.
NOTE:
• Start by aligning the right edge of the correction sticker with the tire size text to the right and the bottom of the
sticker with the text underneath the vehicle weight capacities. This helps ensure proper placement of the
sticker.
• Avoid touching the back side of the sticker to prevent transferring oil from your skin to the adhesive on the
sticker.
3. Replace the Owner’s CD and the Owner’s Guide with new ones. Discard the original Owner’s Guide using your
dealership’s normal recycling process.
END
Page 2 of 2