NTB22-014
Service Bulletin Details
Public Details for: NTB22-014
Intelligent key not detected in center console if you confirm the intelligent key fob is not detected when above or around the center console area. Action use the service procedure in the bulletin to reconfigure the hands free module
Models from 2022
2022 NISSAN SENTRA |
Models from 2021
2021 NISSAN SENTRA |
Classification: KS22-001 Reference: Date: NTB22-014 March 3, 2022 INTELLIGENT KEY NOT DETECTED IN CENTER CONSOLE APPLIED VEHICLES: APPLIED GRADES: 2021-2022 Sentra (B18) S IF YOU CONFIRM The Intelligent Key fob is not detected when above or around the center console area. ACTION Use the SERVICE PROCEDURE in the bulletin to reconfigure the Hands Free Module (HFM). IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/11 SERVICE PROCEDURE IMPORTANT: Before starting, make sure: ASIST on the CONSULT PC has been synchronized (updated) to the current date. All CONSULT software updates (if any) have been installed. 1. Connect the Vehicle Interface (VI) to the vehicle. 2. Turn the ignition ON with the engine OFF. 3. Start CONSULT on the CONSULT PC. The serial number will display when the VI is recognized. 4. Select Re/programming, Configuration. The VI is recognized Figure 1 2/11 NTB22-014 5. Use the arrows (if needed) to view and read all precautions. 6. Check the box confirming the precautions have been read, and then select Next. Figure 2 7. Select Automatic Selection(VIN). Figure 3 3/11 NTB22-014 8. Allow the CONSULT to perform automatic VIN selection. Figure 4 9. Confirm the VIN or Chassis # is correct, and then select Confirm. XXXXXXXXXXX XXXXXX Figure 5 4/11 NTB22-014 10. Allow the System call to complete. Figure 6 11. Confirm the VIN is correct for the vehicle, and then select Confirm. XXXXXXXXXXX XXXXXX Figure 7 5/11 NTB22-014 12. Select HANDS FREE MODULE. Figure 8 13. Select After ECU Replacement under VEHICLE CONFIGURATION. Figure 9 6/11 NTB22-014 14. Select Manual selection. Figure 10 15. Select Type ID “285J7-6LE3A”, and then select Next. Figure 11 7/11 NTB22-014 16. Verify the ignition is ON and the engine is OFF, and then select OK to write the configuration. Figure 12 17. Select USA/CANADA Dealers from the drop down menu, and then select OK. Figure 13 8/11 NTB22-014 18. Login using your NNAnet credentials. Figure 14 19. Allow the Write Configuration to complete. Figure 15 9/11 NTB22-014 20. Confirm that the Type ID is now “285J7-6LE3A”. 21. Select End. Figure 16 10/11 NTB22-014 CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: (1) DESCRIPTION PFP OP CODE SYM DIA FRT Reconfigure Hands Free Module (1) RXA4AA ZE 32 0.3 Reference the electronic parts catalog and use the Smart Keyless Control Assembly (285E1-*****) as the Primary Failed Part (PFP). AMENDMENT HISTORY PUBLISHED DATE REFERENCE March 3, 2022 NTB22-014 DESCRIPTION Original bulletin published 11/11 NTB22-014