NTB22-016

Classification:
Reference:
EL21-019
Date:
NTB22-016
March 9, 2022
WIRELESS CHARGING PAD IS INOPERATIVE
APPLIED VEHICLES:
APPLIED VINS:
APPLIED DATES:
APPLIED GRADES:
2021 Rogue (T33)
VINs starting with JN8
Built before May 26, 2021
Platinum
IF YOU CONFIRM
The wireless charging pad is inoperative,
AND
No metal or electronic objects, such as coins, keys, Intelligent Key fob, cigarette lighter,
credit cards, etc., are on the wireless charging pad.
ACTION
Using CONSULT, confirm the wireless charging pad (WL CHG) status shows the Charge
stop request as "STOP".

If the Charge stop request status is “STOP”, replace the Intelligent Key Unit with
one listed in PARTS INFORMATION on page 8.

If the Charge stop request status is “No”, this bulletin does not apply. Refer to
the ESM for further diagnostic information.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/8
SERVICE PROCEDURE
Confirm Wireless Charging Pad Status
1.
Connect the VI to the vehicle.
2.
Start CONSULT.
3.
Wait for the VI to be recognized.

4.
The serial number will display when the VI is recognized (Figure 1).
Select Diagnosis (All Systems).
The VI is
recognized
Figure 1
2/8
NTB22-016
5.
Check the box to confirm the precaution instructions have been read, and then
select Next.
NOTE: Use the arrows (if needed) to view and read all the precautions.
Figure 2
6.
Select Automatic Selection(VIN).
Figure 3
3/8
NTB22-016
7.
Allow CONSULT to perform automatic VIN selection.
Figure 4
8.
Confirm the VIN or Chassis # is correct, and then select Confirm.
XXXXXXXXXXXXXXX
ROGUE
2021MY
Figure 5
4/8
NTB22-016
9.
Allow the System call to be performed.
Figure 6
10.
Confirm the VIN is correct for the vehicle, and then select Confirm.
XXXXXXXXXXXXXXXXXX
Figure 7
5/8
NTB22-016
11.
Select WL CHG.
Figure 8
12.
Select WL CHG again, and then select Charge stop request.
Figure 9
6/8
NTB22-016
13.
Confirm if the WL CHG status shows the Charge stop request as "STOP"
(Figure 10).

If the Charge stop request status is “STOP”, proceed to step 14.

If the Charge stop request status is “No”, this bulletin does not apply. Refer to
the ESM for further diagnostic information.
Figure 10
14.
Replace the Intelligent Key Unit with one listed in PARTS INFORMATION.

15.
Refer to the ESM: BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >
DOOR & LOCK > REMOVAL AND INSTALLATION > INTELLIGENT KEY UNIT
Perform ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT.

Refer to the ESM: BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >
DOOR & LOCK > BASIC INSPECTION > ADDITIONAL SERVICE WHEN
REPLACING INTELLIGENT KEY UNIT
After replacing the Intelligent Key Unit, writing the vehicle specifications and
“Register Intelligent Keys” must be performed. If not completed, the Intelligent Key
Unit control functions will not operate correctly.
7/8
NTB22-016
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
Intelligent Key Unit
285E1-6RR0D
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
(1)
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace the Intelligent Key Unit
(1)
RX0MAA
ZE
32
0.8
Reference the electronic parts catalog and use the Smart Entrance Control Unit
(285E1-*****) as the Primary Failed Part (PFP).
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
March 9, 2022
NTB22-016
DESCRIPTION
Original bulletin published
8/8
NTB22-016