K206-NAS1

Page 1 of 3
TECHNICAL BULLETIN
K206NAS1
19 MAR 2014
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,
and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some
vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized
Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 501-12
Service Action: Instrument Panel End Trim
AFFECTED VEHICLE RANGE:
XJ Range (X351)
Model Year:
VIN:
2014
V58603-V66269
MARKETS:
USA
CONDITION SUMMARY:
Situation: An issue has been identified on a select number of 2014 model year XJ (X351) vehicles within the
listed VIN range where the instrument panel end trim may contact the door veneer.
NOTE: Refer to Service Bulletin 6-221USA for affected VINs and VIN-specific parts information.
Action: Retailers are required to HOLD all affected vehicles within the listed VIN range that are in their control
and refrain from releasing the vehicles for new or used vehicle sale pending completion of the rework action
detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery
Inspection (PDI) process but must have it completed prior to vehicle handover to the customer. Affected vehicles
already in the hands of customers should be updated at the next available opportunity.
PARTS:
NOTE: Refer to Service Bulletin 6-221USA for affected VINs and VIN-specific parts information.
DESCRIPTION
PART No. / SUNDRY CODE
QTY. / VALUE
Passenger end trim - Bordeaux
Driver end trim - Bordeaux
C2D1797CJB
C2D1799CJB
1
1
Driver end trim - Jet
Passenger end trim - Jet
C2D1799PVJ
C2D1797PVJ
1
1
Driver end trim - Mineral
Passenger end trim - Mineral
C2D1799LAA
C2D1797LAA
1
1
Driver end trim - Navy
Passenger end trim - Navy
C2D1799JMN
C2D1797JMN
1
1
Driver end trim - Oyster
Passenger end trim - Oyster
C2D1799AMT
C2D1797AMT
1
1
http://topix.jaguar.jlrint.com/topix/service/procedure/457185/ODYSSEY_FSA/G1761174/... 3/31/2014
Page 2 of 3
Passenger end trim - Truffle
Driver end trim - Truffle
C2D1797AMS
C2D1799AMS
1
1
SPECIAL TOOLS:
Refer to Workshop Manual / Service Instruction for any required tools
WARRANTY:
NOTE: Check DDW to ensure that the vehicle is affected by this program prior to undertaking any
rework action. Repair procedures are under constant review, and therefore times / prices are subject to
change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair
time. At the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions
are identified to ensure the correct parts are available and adequate workshop time is allocated for
repairs to be completed at one visit.
Warranty claims must be submitted quoting Program Code 'K206' together with the relevant Option Code from the
table. The SRO and part information listed have been included for information only. The Option Code(s) that allows
for the drive in / drive out allowance may only be claimed if the vehicle is brought into the workshop for this action
alone to be undertaken.
This program is valid for a limited time only. Warranty claims with a repair date prior to the 28 February 2016
closure date must be submitted for payment within 30 calendar days of completion of the repair.
PROGRAM
CODE
OPTION
CODE
DESCRIPTION
SRO
TIME
(HOURS)
PARTS / SUNDRY
CODE
QTY. /
VALUE
K206
B
Instrument panel end trims
- Pair - Renew
76.46.46 0.2
C2D1799CJB
C2D1797CJB
1
1
K206
C
Instrument panel end trims
- Pair - Renew
Drive in/drive out
76.46.46 0.2
10.10.10 0.1
C2D1799CJB
C2D1797CJB
1
1
-
K206
D
Instrument panel end trims
- Pair - Renew
76.46.46 0.2
C2D1799PVJ
C2D1797PVJ
1
1
K206
E
Instrument panel end trims
- Pair - Renew
Drive in/drive out
76.46.46 0.2
10.10.10 0.1
C2D1799PVJ
C2D1797PVJ
1
1
-
K206
F
Instrument panel end trims
- Pair - Renew
76.46.46 0.2
C2D1799LAA
C2D1797LAA
1
1
K206
G
Instrument panel end trims
- Pair - Renew
Drive in/drive out
76.46.46 0.2
10.10.10 0.1
C2D1799LAA
C2D1797LAA
1
1
-
K206
H
Instrument panel end trims
- Pair - Renew
76.46.46 0.2
C2D1799JMN
C2D1797JMN
1
1
K206
J
Instrument panel end trims
- Pair - Renew
Drive in/drive out
76.46.46 0.2
10.10.10 0.1
C2D1799JMN
C2D1797JMN
1
1
-
K206
N
Instrument panel end trims
- Pair - Renew
76.46.46 0.2
C2D1799AMT
C2D1797AMT
1
1
K206
P
Instrument panel end trims
- Pair - Renew
Drive in/drive out
76.46.46 0.2
10.10.10 0.1
C2D1799AMT
C2D1797AMT
1
1
-
K206
Q
Instrument panel end trims
- Pair - Renew
76.46.46 0.2
C2D1799AMS
C2D1797AMS
1
1
http://topix.jaguar.jlrint.com/topix/service/procedure/457185/ODYSSEY_FSA/G1761174/... 3/31/2014
Page 3 of 3
K206
R
Instrument panel end trims
- Pair - Renew
Drive in/drive out
76.46.46 0.2
10.10.10 0.1
C2D1799AMS
C2D1797AMS
1
1
-
NOTE: Normal Warranty policies and procedures apply
SERVICE INSTRUCTION:
1.
CAUTION: Make sure that the
component is correctly located on the
locating pegs when installing.
NOTE: Left-side shown; right-side
similar.
Release the door seal to gain access to the leftside instrument panel end trim.

 Release and remove the left-side instrument
panel end trim.

 To install, reverse the removal procedure.
2. Repeat step 1 to the right-side instrument panel end trim.
http://topix.jaguar.jlrint.com/topix/service/procedure/457185/ODYSSEY_FSA/G1761174/... 3/31/2014